Samsung WF1802WPU/XSG manual Information of main washing programmes

1.Annual energy consumption is based on 220 standard washing cycles for cotton programs at 60 °C and 40 °C at full and partial load, and the consumption of off and left-on modes. Actual energy consumption will depend on how the appliance is used.

2.Annual water consumption is based on 220 standard washing cycles for cotton programs at 60 °C and 40 °C at full and partial load. Actual water consumption will depend on how the appliance is used.

3.Spin extraction is very important when you use a clothes dryer to dry your clothes. The energy for drying costs much higher than the energy for washing.

Wasing with the high spin saves more energy in drying your clothes in a clothes dryer.

4.The ‘standard cotton 60 °C program’ and ‘standard cotton 40 °C program’, which can be selected by adding the Intensive option to the cotton 60 °C and cotton 40 °C program, are suitable to clean normally soiled cotton laundry and they are the most effcient (concerning water and energy consumption) for this type of laundry.

The ‘Eco Bubble’ function always turns on in the ‘Cotton 60 ˚C course’ and ‘Cotton 40 ˚C course’.

Please run Calibration Mode after the installation(see page 20).

In these programs the actual water temperature may differ from the declared temperature.

5.Distance to the wall from the unit is not included in the depth dimension.

Information of main washing programmes

			Capacity	Program	Residual	Water	Energy
Model	Course	Temp (°C)			Moisture	Consumption	Consumption
			(kg)	Time (min)
					Content (%)	(ℓ/cycle)	(kWh/Cycle)
	Cotton	20	4.0	106	57	52	0.25
		40	4.0	156	54	37	0.57
WF1802	Cotton + Intensive	60	4.0	163	54	37	0.77
			8.0	219	53	53	1.14
	Synthetics	40	3.0	91	36	59	0.51

The values on the table have been measured under the conditions specifed in Standard IEC60456/ EN60456. Autual values will depend on how the appliance is used.

appendix _43

06 Appendix

WF1804WP-03025Q-03_EN.indd 43

2014/6/30 13:50:44