Samsung HT-X20R/XET manual Setting the DRC Dynamic Range Compression, Sound Field DSP/EQ Function

Settings (Con’t)

Setting the DRC (Dynamic Range Compression)

This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

1 In Stop mode, press the MENU button.

2 Press the Cursor button to move to <Audio> and then press the ENTER button. 3 Press the Cursor button to move to <DRC> and then press the ENTER button. 4 Press the Cursor , button to adjust the DRC.

When the Cursor button is pressed, the effect is greater, and when the Cursor button is

pressed, the effect is smaller.

Press the RETURN button to return to the previous level.

Press the MENU button to exit the setup screen.

ENG

Sound Field (DSP)/EQ Function

DSP(Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments.

EQ : You can select ROCK, POP, or CLASSIC to optimize the sound for the genre of music you are playing

Press the DSP/EQ button.

<DSP> appears on the display panel.

Each time the button is pressed, the selection changes as follows:

Setting the AV SYNC

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match the video.

press the ENTER button.

You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.

Press the RETURN button to return to the previous level.

Press the MENU button to exit the setup screen.

•POP, JAZZ, ROCK : Depending on the genre of music, you can select POP, JAZZ, and ROCK.

•STUDIO : Provides a sense of presence as if in a studio.

•CLUB : Simulates the sound of a dance club with a throbbing bass beat.

•HALL : Provides a clear vocal as if listening in a concert hall.

•MOVIE : Provides the feeling of a movie theater.

•CHURCH : Gives the feel of being in a grand church.

•PASS : Select this for normal listening.

• The DSP/EQ function is only available in STEREO mode.

Press the PL II mode button to show STEREO on the display.

•This feature works with CDs, MP3-CDs, DivX and Dolby Digital discs.

•When playing a DVD disc encoded with two or more channels, multi-channel mode will be selected automatically and DSP/EQ function does not work.

SETUP