Samsung HT-C755W/LAG manual Installing the Speakers on the Tallboy Stand, Front/Rear Speakers only

Connections

Connecting the Speakers

Installing the Speakers on the Tallboy Stand

*HT-C755W

*Front/Rear Speakers only

1.	Connect the Stand Pole to the Stand Bracket.
2.	Insert and tighten three large screws into the
	three holes on the Stand Bracket as shown in the
	illustration.

1

Stand Bracket

Stand Pole

2

3. Straighten the speaker wire and route it through

the Stand Pole.

4. Connect the Stand Pole to the Stand Neck and

Stand Base.

- Make sure all holes are properly connected,

if not, the stand will fall down.

3

4

Stand Neck

Stand Base

Stand Pole

5.	Insert and tighten three large screws into the
	three holes on the bottom side of the stand-base
	as shown in the illustration.
6.	Connect the speaker wire to the speaker jack.
7.	Fully insert the Stand Bracket into the speaker's
	clasp to stand speaker.
8.	Insert and tighten two small screws into the two
	holes to connect them.

5

7

6

8

18 English