Samsung LS22DPWCSS/EDC, LS22DPWCSQ/EDC manual Tilt angle, Removing the base

Page 9

Using (),You can swivel the monitor left and right at an angle of 330 ° to set the monitor lengthwise. The rubber under the stand is to avoid the monitor slide.

Tilt angle

Using (), You can adjust the tilt angle forward and backward for the most comfortable viewing angle.

Removing the base

1.Turn off your monitor and unplug its power cord.

2.Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.

3.Remove two screws () and then remove the Stand from the LCD monitor.

Image 9 Contents
LCD Monitor Type Monitor & Sliding Stand Monitor & Speakeroption Manual UnpackingFront Warranty Card Users Guide Monitor Driver Quick Setup GuideNatural Color software MagicTune softwareRear For using a locking device, contact where you purchase it On / OFF O Kensington Lock Connecting the Monitor RGBDVI Connecting a Speaker Using the Stand Sliding StandSwivel stand Removing the base Tilt angleAttaching a Base Mode,Recommended Mode 1680 x 1050 60 Hz on the screen? Can you see Check Signal Cable on the screen?Connected using the D-sub cable Connected using the DVI cable→ Display → Settings Refer to the Preset Timing ModesQuestion Self-Test Feature Check Useful Tips
Related manuals
Manual 65 pages 46.8 Kb Manual 65 pages 60.88 Kb Manual 65 pages 9.3 Kb Manual 15 pages 64 Kb Manual 65 pages 52.94 Kb Manual 64 pages 41.47 Kb Manual 63 pages 11.57 Kb Manual 63 pages 44.06 Kb Manual 63 pages 45.4 Kb Manual 63 pages 3.81 Kb Manual 63 pages 30.27 Kb Manual 64 pages 2.14 Kb Manual 66 pages 13.96 Kb Manual 52 pages 62.53 Kb Manual 65 pages 25.22 Kb Manual 67 pages 10.93 Kb