Notices for using Bluetooth
•Ensure that your device and the other Bluetooth device are within the maximum Bluetooth range (10 m). If there are obstacles between the devices, the operating distance may be reduced.
•Ensure that there are no obstacles between your device and the connected device, including human bodies, walls, corners, or fences.
•Do not touch the Bluetooth antenna of the connected device.
•Bluetooth uses the same frequency as some industrial, scientific, medical, and low voltage equipment and interference may occur when connecting via Bluetooth near these types of equipment.
•Some devices, especially those that are not tested or approved by the Bluetooth SIG, may be incompatible with your device.
Connecting via Bluetooth
1 Turn on the Bluetooth speaker. Then, press and hold the Pairing ( 
) button for about three seconds.
•The speaker enters the Bluetooth pairing mode and the Power button flashes red, blue, and green.
2 | On the |
| setup mode and search for Bluetooth devices. |
3 | From the search results, select the Bluetooth speaker. |
•When pairing is complete, the speaker appears as “Connected”in the devices list.
English
7