Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎Preset: Connecting the mains and antenna.
✎The position of power input port may differ depending on the model.
TV Rear Panel |
| VHF/UHF Antenna |
| Cable | |
|
|
or
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of
1 | Selecting a language |
2 | Selecting Store Demo or |
Home Use |
Press the ▲ or ▼ button, then press the ENTEREbutton. Select the desired OSD (On Screen Display) language. Press the ◄ or ► button, then press the ENTEREbutton.
ySelect the Home Use mode. Store Demo Mode is for retail environments.
yReturn the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When the OSD volume is displayed, press and hold MENU for 5 sec.
POWER
P
3 | Selecting an area. | Press the ▲ or ▼ button, then press the ENTEREbutton. |
| Select the appropriate area. | |
4 | Selecting a channel | Press the ENTEREbutton, then the channel search will start automatically. |
| For more information, refer to Channel → Auto Store. (P. 11) | |
5 |
| ✎ Press the ENTEREbutton at any time to interrupt the memorisation process. |
Setting the clock | Press the ◄ or ► button to select Month, Day, Year, Hour, Minute or am/pm. | |
| Set these by pressing the ▲ or ▼ button. | |
6 | Enjoy your TV. | Press the ENTEREbutton. |
|
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is
✎You should do Plug & Play (MENU → System) again at home although you did in shop.
✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to
Input Cables (Sold Separately)
HDMI | Component | Composite (AV) | Coaxial (RF) | |
|
|
|
|
|
Service
Connector for service only.
6 English