Basics
Charging the battery
Charge the battery before using it for the first time or when it has been unused for extended periods.
1
2
Use only
Plug the small end of the charger into the multipurpose jack of the device, and plug the large end of the charger into an electric socket.
Connecting the charger improperly may cause serious damage to the device. Any damage caused by misuse is not covered by the warranty.
After fully charging, disconnect the device from the charger. First unplug the charger from the device, and then unplug it from the electric socket.
Do not remove the battery before removing the charger. This may damage the device.
To save energy, unplug the charger when not in use. The charger does not have a power switch, so you must unplug the charger from the electric socket when not in use to avoid wasting power. The charger should remain close to the electric socket and easily accessible while charging.
10