Instructions for Use

QuickPort® F-Type Bulkhead Module

Módulo en Bloque QuickPort Tipo F

Module coaxial QuickPortMD de type « F »

A Division of Leviton Manufacturing Co.,Inc.

Phone: (425) 485-4288

Fax: (425) 483-5270

www.levitonvoicedata.com

40831-*

40731-*

QuickPort® F-Type Bulkhead

Module

DESCRIPTION

Leviton’s QuickPort® F-Type Bulkhead Modules are designed to snap into any QuickPort housing. Use with other QuickPort connectors to create a customized multimedia center for TV, VCR, DVD and satellite applications.

INSTALLATION

1.Attach an appropriate connector to your cable using the instructions provided by the connector’s manufacturer.

2.Connect cable to the back of the module and rotate the module clockwise until the connector is fully seated.

3. Snap the F-connector into the wallplate according to that wallplate’s instruction sheet. Orient the “UP” designation on module, with “UP” designation on wallplate.

IMPORTANT INSTRUCTIONS

1.Read and understand all instructions. Follow all warnings and instructions marked on the product.

2.Do not use this product near water—e.g., near a tub, wash basin, kitchen sink or laundry tub, in a wet base- ment, or near a swimming pool.

3.Never push objects of any kind into this product through openings, as they may touch dangerous voltages.

4.SAVE THESE INSTRUCTIONS.

SAFETY INFORMATION
1.	Never install communications wiring or components dur-
2.	ing a lightning storm.
2.	Never install communications components in wet loca-	02-10-93062-PK-0A
	tions unless the components are designed specifically for
3.	use in wet locations.
	use in wet locations.
	Never touch uninsulated wires or terminals unless the
4.	wiring has been disconnected at the network interface.
4.	Use caution when installing or modifying communications
5.	wiring or components.
5.	To prevent electrical shock, each opening must be filled with a
	module.