Connecting External Components
Connecting an External Digital Component
Example: Digital signal components such as a Combo or CD Recorder.
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
CONNECTIONS
Optical Cable | VOLTAGE |
SELECTOR | |
| |
(not included) |
|
DIGITAL OUT | VIDEO IN |
Audio Cable
If the external
analog component has only one Audio Out, connect either left or right.
VOLTAGE
SELECTOR
The AC Cord must be plugged into an appropriate socket.
Before plugging your system into an
AC outlet, you must check the
|
| VIDEO OUT | voltage. |
|
|
| |
|
|
| Check the position of the voltage |
|
|
| selector on the rear of the system |
|
|
| (OPTIONAL). |
L | R |
| 1. Plug the AC Cord on the rear of the |
| system into an appropriate outlet. | ||
|
|
| |
|
|
| 2. Press the On/Standby button to |
|
|
| switch your DVD Player system on. |
1 Connect Video Out on the DVD player to Video In on the TV.
2 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
3 Press AUX on the remote control to select ‘DIGITAL IN’.
•Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
•You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
1 Connect Video Out on the DVD player to Video In on the TV.
2 Connect Video In on the DVD player to Video Out on the external analog component.
3 Connect Audio In on the DVD player to Audio Out on the external analog component.
•Be sure to match connector colors.
4 Press AUX on the remote control to select AUX 1 or AUX 2.
•Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
•You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
15 | 16 |