Setup
Delay Time
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Centre and Rear speakers. You can also set the Test Tone in this mode.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a
delay effect to the Center and Rear Speakers.
Settings
| Delay Time |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| Front |
|
|
|
| |
|
| Center | : 00mSEC | ||||
|
| Rear | : 10mSEC | ||||
|
| Subwoofer |
|
|
|
| |
|
|
|
|
|
|
|
|
|
| Test Tone | : OFF |
|
|
| |
|
|
|
|
|
|
|
|
| Change | Select | Return | ||||
|
|
| Move | Select |
| Return | |
|
|
| |||||
✎NOTE
`The Delay Time menu will be activated only when the 5.1 channel source is played.
`You can not set Centre and Rear in this mode when their Speaker Size is set to None.
Setting the Centre Speaker
If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
Distance |
|
|
|
|
|
| |
between | 0.00m | 0.34m | 0.68m | 1.06m | 1.40m | 1.76m | |
Df and Dc |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
Delay | 00 ms | 01 ms | 02 ms | 03 ms | 04 ms | 05 ms | |
Time | |||||||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
Setting the Rear Speaker
If the distance of Dc is equal to or longer than the distance of Dr in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
Distance |
|
|
|
|
|
| |
between | 0.00m | 1.06m | 2.11m | 3.16m | 3.62m | 5.29m | |
Dr and Dc |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
Delay | 00 ms | 03 ms | 06 ms | 09 ms | 12 ms | 15 ms | |
Time | |||||||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
✎NOTE
`With 
PL II (Dolby Pro Logic II), the delay time may be different for each mode.
`With
`The Centre channel is only adjustable on 5.1 channel discs.
Test Tone
Ideal Centre | Settings |
|
|
Speaker placement | Speaker Setting |
|
|
|
|
| |
| Speaker Size |
|
|
| Sound Edit |
|
|
| Delay Time |
|
|
| Test Tone | : On | ▶ |
| Select | Return | |
| Move | Select | Return |
Ideal Rear
Speaker placement
Use the Test Tone feature to check the speaker connections.
Place all speakers within this circle.
Df: The distance from Front Speaker
Dc: The distance from Centre Speaker
Dr: The distance from Rear Speaker
24 English
~Press the _+ buttons to select ON.
~The test tone will be sent to Front Left ➞ Center
➞ Front Right ➞ Rear Right ➞ Rear Left ➞ Subwoofer in order.
To stop the test tone, press the ENTER button.