USER BUTTON CUSTOM FUNCTION (Continued)
To set Section Repeat
This function enables you to listen to specific parts of a track repeatedly. Recommended for language learning.
2
3
| ||
|
|
|
|
|
|
1.Set the User Button Mode to <Repeat
2.Press the button at the beginning of the section you want to repeat.
The starting point is set and <AJ> will appear in the screen display window.
3.Press the button again to set the ending of the section you want to repeat.
<AQB> will appear on the screen and the specified section starts to play repeatedly.
To cancel Section Repeat
Press the button again during Section Repeat.
Section Repeat will be canceled.
Section Repeat will be automatically canceled in the following case.
NOTE The starting point of the section repeat is set but the ending point is not set until after the current track ends.
listening to music _ 47