connections
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV and other components.
Before Connecting the DVD Player
-Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
-Refer to the user’s manual of the additional components you are connecting for more information on those particular components.
Connection to a TV (For Video)
● SETUPCONNECTIONS
1
Using video/audio cables, connect the VIDEO (yellow)/ AUDIO (red and white) OUT terminals on the rear of the
DVD player to the VIDEO (yellow)/AUDIO (red and white)
IN terminals of TV.
2
Turn on the DVD player and TV.
WHITE
RED |
RED |
|
WHITE | Audio Cable |
YELLOW
YELLOW
RED | WHITE | Video Cable | |
Video | |||
Audio |
| ||
| Cable | ||
Cable |
| ||
|
| ||
RED | WHITE | YELLOW |
3
Press the TV/VIDEO button on the TV's remote control to select Video.
Note
-Noise may be generated if the audio cable is too close to the power cable.
-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 12 to 14)
-The number and position of terminals can vary depending on your TV set. Please refer to the user's manual of the TV.
-If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence:
English _9