Setting Up the Display Options, TV Aspect

00168V-HD936(GB)-2 8/21/03 11:04 AM Page 42

Setting Up the Display Options

1 With the unit in Stop mode, press the MENU button.

2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.

3 Select Display Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.

4 Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.

TV Aspect

Still Mode

Screen Messages

Front Display

Black Level

NTSC Disc Output

		DISPLAY SETUP

	TV Aspect	: 4:3 L-Box
	Still Mode	: Auto
	Screen Messages	: On
	Front Display	: Auto Dim
	Black Level	: Off
	NTSC Disc Output	: PAL 60 Hz

TV ASPECT

4:3 Letter Box

4:3 Pan Scan

16:9 Wide

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).

1. 4:3 Letter Box :

Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

2. 4:3 Pan Scan :

Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)

3. 16:9 Wide :

You can view the full 16:9 picture on your widescreen TV.

Still Mode

These options will help prevent picture shake in still mode and display small text clearer.

1. Auto : When selecting Auto, Field/Frame mode will be automatically converted.

2. Field : Select this feature when the screen shakes in the Auto mode.

3. Frame : Select this feature when you want to see small letters more clearly in the Auto mode.

Screen Messages

Use to turn on-screen messages On or Off.

Front Display

Adjust the brightness of the unit’s front panel display.

1. Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.

2. Bright : Makes the Front Panel Display bright.

3. Dim : Makes the Front Panel Display dim.

Black Level

Adjusts the brightness of the screen.(On/Off)

NTSC Disc Output

CHANGING SETUP

“NTSC” if the screen only has one NTSC-video entrance. If this is not the case, you can choose to leave “ PAL 60Hz” as is.