Samsung DVD-D530K/KE Reference, Setting Up the Security Options, Setting Up the General Options

Setting Up the Security Options

The Parental Control function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.

Setting Up the Rating Level and Changing the Password

1.With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then press the ENTER button.

2.Press the π/† buttons to select SECURITY, and then press the ® or ENTER button. Enter your password.

3.Press the π/† buttons to select PARENTAL/CHANGE PASSWORD, and then press the ® or ENTER button.

4.Press the π/† buttons to select the rating level you want, and then press the ENTER button. e.g) Setting up in KID SAFE

- For example, if you select the Kids Safe level, discs that contain level 2 or higher will not play.

5.Enter your password. If this is the first time, enter 0000. Then, enter a new password. The new pass- word must be a number other than 0000 to activate the parental control function. Then, re-enter the new password.

Security Levels :

❶KID SAFE

❷G (General Audiences) : All Ages Admitted

❸PG (Parental Guidance suggested) : Some material may not be suitable for young children.

❹PG 13 (PG-13 Parents strongly cautioned) : Some material may be inapproriate for children under 13.

❺PGR (Parental Guidance Recommended) : These are not necessarily unsuitable for children, but viewer discretion is advised, and parents and guardians are encouraged to supervise younger viewers.

❻R (Restricted) : Under 17 requires accompanying adult

❼ NC17 (NC-17) : No one 17 and under admitted.

❽ ADULT

Note:

- If you have forgotten your password, see “Forgot Password” in the Troubleshooting Guide.

Setting Up the General Options

1.With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then press the ENTER button.

2.Press the π/† buttons to select GENERAL, then press the ® or ENTER button.

3.Press the π/† buttons to select the desired item, then press the ® or ENTER button.

Setting Up the Support Options

Support option enable you to check your DVD player information such as the model code, Software Version, The serial and version numbers can be found on the back side of your DVD-Player.

1.With the unit in Stop mode, press the MENU button. Press the √/® buttons to select SETTINGS, then press the ENTER button.

2.Press the π/† buttons to select SUPPORT, then press the ® or ENTER button.

3.Select PRODUCT INFORMATION, then press the ® or ENTER button.

Reference

Troubleshooting

Before requesting service (troubleshooting), please check the following.

Problem	Action
The screen is blocked.	• Press the ® button (in front panel) for more than 5 seconds under no
	disc inside. All setting will revert to factory settings.
	• Press the ® button (in front panel) for more than 5 seconds under no
Forgot password.	disc inside. All setings including the password will revert to the factory
	settings. Don't use this unless absolutely necessary.
	• Check the Video output is HDMI enabled.
No HDMI output	• Check the connection between the TV and the HDMI jack of DVD player.
	• See if the TV supports this 480p/ 576p/720p/1080i/1080p DVD player.
Abnormal HDMI output	• If snow noise appears on the screen, it means that TV does not
screen.	support HDCP (High-bandwidth Digital Content Protection).
	• Check your TV system setup correctly.
HDMI output Jitter	• The screen Jitter phenomenon may occur when frame rate is converted from 50Hz to
	60 Hz for 720p/1080i/ 1080p HDMI (High Definition Multimedia Interface) Output.
	• Please refer to the user's manual of your TV.

13