Fps-Hl

EMERGENCY

LIGHTING EQUIPMENT

INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

When using electrical equipment, basic safety precautions should always be followed, including the following:

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

1.CAUTION – To prevent electrical shock, do not mate unit connector until installation is complete and A.C. power is supplied to the unit.

2.CAUTION – This fixture provides more than one power supply output source. To reduce the risk of electri- cal shock, disconnect both normal and emergency sources by turning off the A.C. branch circuit and by disconnecting the unit connector.

3.CAUTION – The integral, high temperature Ni-Cad battery is replaceable. To replace the battery, discon- nect the unit connector and remove both switched and unswitched A.C. power to the fixture. Remove the lid screw and open the lid to expose the battery. Unplug the battery connector and replace with part number 44900-006 (14.4V Ni-Cad battery only). Recycle the used battery. The EPA certified RBRC® Battery Recycling Seal indicates voluntary participation in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alternative to placing used Ni-Cad batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-822-8837 for information on Ni-Cad battery recycling and disposal bans/restrictions in your area. Involvement in this program is part of a commitment to preserving the environment and conserving natural resources.

4.DO NOT USE OUTDOORS. The FPS-HLis for use with grounded, UL Listed, indoor fixtures except in heated air outlets or hazardous locations.

5.The FPS-HLrequires an unswitched A.C. power source of either 120 or 277 volts. Properly cap the unused A.C. lead.

6.Do not mount near gas or electric heaters.

7.The FPS-HLshould be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized personnel.

8.The FPS-HLmounts on top of the fixture or adjacent to the fixture on an optional T-bar mounting bracket.

9.The FPS-HLwill cold strike and operate one 2′–8′or two 2′–4′instant start, rapid start, U shape or circline, T8 through T12 fluorescent lamps, including energy saving and long 4 pin compact lamps for 90 minutes.

10.The FPS-HLoperates lamps as follows:

One 2′–8′, or two 2′–4′lamps for 90 minutes at reduced light output.

One 2′–4′lamp for 90 minutes at full light output.

11.The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.

12.Do not use this equipment for other than intended use.

13.Install in accordance with the National Electrical Code and local regulations.

14.Installation and servicing should be performed by qualified personnel.

15.Lighting fixture manufacturers, electricians and end users need to ensure product system compatibility before final installation.

SAVE THESE INSTRUCTIONS

FPS-HL specifications

Thomas & Betts, a leader in electrical components and solutions, offers a diverse range of products designed to meet various industrial needs. Among their offerings, the FPS-HL (Flat Panel Support - Heavy Load) stands out as a robust solution for supporting flat panel equipment in demanding environments.

One of the standout features of the FPS-HL is its high load capacity. Designed to support significant weight, it ensures that flat panels—whether they are displays, screens, or other types of equipment—are securely mounted. This is particularly beneficial in industrial settings where heavy equipment is commonplace.

The FPS-HL boasts a durable construction that is resistant to corrosion, making it suitable for use in harsh environments. The materials used in its manufacturing undergo rigorous testing to ensure they can withstand exposure to various chemicals and elements that are often present in industrial settings. This durability extends the lifespan of the support system, reducing replacement costs and downtime.

Another notable characteristic of the FPS-HL is its versatility. It can be installed in a variety of orientations, allowing users to adapt the mounting solution to their specific requirements. This flexibility is crucial in environments where space is limited or where specific angles of mounting are necessary for optimal performance.

The FPS-HL also incorporates advanced technology to facilitate easy installation and maintenance. With its user-friendly design, technicians can swiftly install the support system, which minimizes labor time and costs. Furthermore, the support's maintenance features allow for quick inspections and adjustments, ensuring that the equipment remains secure over time.

Safety is always a priority when dealing with heavy loads, and the FPS-HL includes features designed to enhance stability and prevent accidents. The support system is engineered to distribute weight evenly, reducing the risk of tipping or falling. This is critical for maintaining a safe workplace, particularly in areas where personnel may be working in close proximity to heavy equipment.

In summary, the Thomas & Betts FPS-HL is an ideal choice for industries requiring a robust, reliable, and versatile flat panel support system. With its high load capacity, durable construction, ease of installation, and emphasis on safety, it addresses the critical needs of modern industrial applications. Whether in manufacturing, warehousing, or other sectors, the FPS-HL provides a dependable solution for mounting heavy flat panel equipment securely.