Case 3 : Connecting to a TV with an Audio/Video cable - Good Quality
1.Using an Audio/Video cable, connect the VIDEO OUT (yellow) / AUDIO OUT (red and white) terminals on the rear of the player to the VIDEO IN (yellow) / AUDIO IN (red and white) terminals of your TV.
2.Turn on the player and TV.
3.Press the input selector on your TV remote control until the “VIDEO” signal from the player appears on the TV screen.
•If you have set the remote control to operate your TV (See page 20), press the TV SOURCE button on the remote control and select VIDEO as the external source of the TV.
Audio/Video cable
(not included)
04 Connections
Red White Yellow
✎✎NOTE
`` Noise may be generated if the audio cable is placed too close to the power cable.
`` If you want to connect to an AV receiver, please refer to the AV receiver connection pages. (See pages 24~25)
`` The number and position of input terminals may vary depending on your TV set. Please refer to the user manual of your TV.
!! CAUTION
`` Do not connect the player to your TV through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television.
English 23