Therma-Tru Double-door, Swing-in specifications Smooth-Star Door System Specifications

		⎠
	Smooth-Star Door System Specifications
DOOR PANELS		Faces: 1/16-inch minimum thickness, fiberglass-reinforced thermoset composite,
		surface lightly textured with 80-grit brushing, accepts most exterior and interior paints.
		Color: white. Door edges: machinable kiln-dried pine, primed to match color of faces,
		lock edge reinforced with laminated veneer lumber core, lockset area reinforced with
		solid blocking for hardware backup. Door bottom edge: moisture-proof and decay-
		proof composite. Core: foamed-in-place polyurethane, CFC-free, density 2.0 pcf
		minimum, K-factor of 0.15 for minimum thermal transmittance. Standard factory sizes
		may be edge trimmed or end trimmed in shop or field to suit replacement door size
		requirements.
OPTIONAL		Factory-glazed: perimeter moldings flush with skin and made as integral part of skin.
FACTORY-GLAZED		Glass minimum 1/8-inch tempered, two thicknesses with sealed airspace between, air-
GLASS OR GLASS		space typically 3/8-inch. Options for grooved Bevelline, Low-E, or grille between glass
INSERTS		(GBG). Optional removable wood grilles.
		Inserts (lites): perimeter frames in raised-molding patterns, frame moldings molded or
		extruded from proprietary thermoplastic compounds formulated for exterior exposure
		and weatherability. Certified to withstand high service temperatures resulting from
		exposure behind storm doors or dark finishes. Frames paintable, screw-fastened to
		doors, screw holes concealed with grain-matched plugs in matching material and finish.
		Glass minimum 1/8-inch tempered, two thicknesses with sealed airspace between,
		airspace typically 1/4-inch. Options for leaded decorative glass, triple-glazed in airspace
		between tempered glass faces, with solid brass or zinc caming. Etched glass options.
		Low-E Options. Optional removable wood grilles.
OPTIONAL		Molded from fiberglass-reinforced composite, surface lightly textured with 80-grit
DECORATIVE PANELS		brushing, accepts most exterior and interior paints, fastened with very high bond tape.
GASKETING,		Swing-in models: jacketed thermoset closed-cell foam, press-fit in kerfs at jamb stops in
WEATHERSTRIPPING		frames. Extruded thermoplastic elastomer, finned and chambered design, press-fit into
		bottom edge of doors. Corner pads at bottom margin corners from jacketed thermoset
		closed-cell foam.
		Swing-out models: same weatherstrip as swing-in models, bottom gaskets integral
		with sills.
HINGES, STRIKES		Steel, zinc-plated, brass or	chrome finish. Screws plated and finished to match
		hardware. Min-imum hinge size 4 x 4 x .098 inches. Strikes are proprietary adjustable
		type, permitting in-out adjustment of door in frame, up to 3/16 inch.
FRAMES		Milled from 5/4 kiln-dried white pine, profiled with 1/2-inch stop, minimum depth
		4-9/16-inches. Other frame depths available to match wall constructions. Exterior
		casing brickmould in WM180 pattern available. Optional maintenance-free clad frames
		and brickmoulds are prefinished white.
SILL, SWING-IN, SWING		Wide range of sill options:	thermally-broken fixed, adjustable with oak threshold,
OUT, SIDELITE OPTIONS		swing-in, swing-out, public-access, aluminum brass or bronze anodized finish.
		Double-door and hinged patio door models: double door ion 6/8 height and 8/0 height
		available with both leaves active and locking astragal available, hinged patio doors in
		standard 6/8 height, replacement 6/6 height, and 8/0 height available, patio models
		available in two-panel and three-panel options (one door active, others stationary).
		Sidelite options: raised molding models, and raised panel models with glass moldings to
		match doors, in 12-inch and 14-inch widths. Sidelite systems available with mullions
		separating doors from sidelites, and continuous sills and frame head, or as separately
		framed and cased units, joined together.
TRANSOM OPTIONS		Transom frames, either rectangular or elliptical, match door frames and have matching
		exterior brickmould. Clear insulated glass or with decorative leaded glass detailed with
		solid brass or zinc caming. Optional removable muntins for divided-lite look in
		rectangular transoms.

Issued: Oct 2008

SPEC

Door System Specifications