Samsung GT-P1000CWAECT manual Wi-Fi, ›› Activate the Wlan feature, ›› Find and connect to a Wlan

1	If you want to transfer files from or to a memory card, insert a memory
2	card into the device.
	In Menu mode, select Settings → Wireless and network → USB
3	settings → Mass storage.
	Press [ ] to return to Idle mode.
4	Using the PC data cable, connect the multifunction jack on your device
5	to a PC.
	When connected, select Mount.
6	Open the folder to view files.
7	Copy files from the PC to the memory card.
8	When you are finished, select Turn Off.

To disconnect the device from the PC, click the USB device icon on the Windows task bar and click the option to safely remove the mass storage device. Then remove the PC data cable from the PC. Otherwise, you may lose data stored on the memory card or damage the memory card.

Wi-Fi

Learn to use your device’s wireless networking capabilities to activate and connect to any wireless local area network (WLAN) compatible with the IEEE 802.11 a/b/g/n standards.

You can connect to the internet or other network devices anywhere an access point or wireless hotspot is available.

Your device uses non-harmonised frequency and is intended for use in all European countries. The WLAN can be operated in the EU without restriction indoors, but cannot be operated outdoors in France.

››Activate the WLAN feature

1	In Menu mode, select Settings → Wireless and network → Wi-Fi
2	settings.
	Select Wi-Fito activate the WLAN feature.

An active WLAN running in the background will consume battery power. To preserve battery power, activate the WLAN only when needed.

››Find and connect to a WLAN

1	In Menu mode, select Settings → Wireless and network → Wi-Fi
	settings.
2	The device will automatically search for available WLANs.
	Select a network under Wi-Fi networks.
3	Enter a password for the network (if necessary).
4	Select Connect.

Connectivity 51