Samsung GT-P7300UWATUN, GT-P7300FKAARB, GT-P7300FKEJED ››Add a Wlan manually, Setup WPS

››Add a WLAN manually

1 Open the application list and select Settings → Wireless and networks → Wi-Fi settings → Add Wi-Fi network.

2 Enter the SSID for the network and select the security type.

3 Set the security settings depending on the selected security type.

4 Select Save.

››Connect to a WLAN using a Wi-Fi Protected

Setup (WPS)

Using WPS, you can connect to a secured network. To connect to a WLAN with a WPS button,

1 Open the application list and select Settings → Wireless

and networks → Wi-Fi settings.

2 Select a network indicated as WPS available and select

Network setup.

3 Select WPS push button → OK.

4 Press a WPS button on the access point within 2 minutes. To connect to a WLAN with a WPS PIN,

1 Open the application list and select Settings → Wireless

and networks → Wi-Fi settings.

2 Select a network indicated as WPS available and select

Network setup.

3 Select WPS pin from access point or WPS pin from this device → OK.

4 On the access point, enter the PIN and press the start button.

Connectivity

80