Airing Your Room
If the atmosphere in your room is stale, you can air the room using the Fan feature.
1If necessary, press the 
(On/Off) button.
Result: ◆ The power indicator on the control panel comes on.
◆The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
◆Switched on
◆Stopped
lt will start up normally after three minutes.
2If the 
is not displayed on the control panel, press the 
button on the remote control one or more times until it appears.
Result: ◆ The indoor unit beeps each time you press the 
button.
◆The air conditioner runs in the Fan mode.
Note You can change modes at any time.
3Select the fan speed by pressing the 
button one or more times until the required setting is displayed:
Low
High
Turbo
Result: ◆ Each time you press the 
button, the indoor unit beeps.
4To control the direction of the air flow, refer to page 16.