Cleaning the Pre filter
fIfthe filter clean/replacement indicator (
) is turned on, clean the Pre filter.
Pull the back cover forward by holding the left and right edges of the cover. Remove the Pre filter by pressing down the top clip of the filter with your finger.
Fit the Pre filter into the bottom holes and then insert the top clip.
Insert the hooks of the back cover into the grooves at the bottom of the main body (①) and press the edges of the back cover so that it fits into
8 holes(②).
Clean the Pre filter under running water.
•If the filter is very dirty, clean the filter with a warm neutral detergent solution.
ENGLISH
Dry the filter completely in the shade.
•When you dry the Pre filter, do not dry it under direct sunlight.
② 
NOTE
①
Back cover
•Clean the Pre filter at least once every two weeks. However, since the cleaning cycle is determined by the operating environment and the operating period, clean the filter more frequently when the air purifier is operating in a dusty environment.
•When the filter is heavily contaminated with
dust, it is advisable to clean the dust first with a vacuum cleaner followed by water.
19
ACR |