Selecting the Automatic Mode
In the Automatic Mode, the air cleaner automatically adjusts the clean level according to the signal of the more contaminated level after comparing the dusts and motes contamination level with the odor contamination level in the indoor air. Anions are generated into an air automatically and the air flow blade does not move.
1If necessary, press the 
(Power) button.
Result: ◆ The Power indicator on the display comes on.
◆The air cleaner runs in the Auto Mode.
◆ The air cleaner makes a ringing sound.
2 If the 
is not displayed on the display, select the Auto mode by pressing
the 
button until it is displayed on the display.
Result: ◆ The air cleaner beeps.
◆ The air cleaner operates in the Auto mode.
Note You can change modes at any time.
3To control the direction of the air flow, refer to page 18. To adjust the clean level, refer to page 16.
To adjust the generating anions, refer to page 14.