Information codes
The Washer may display information codes to help you understand what is occurring with your Washer better.
CODE SYMBOL | MEANING | SOLUTION |
|
|
|
| The Water Level sensor is not | Call for service. |
| working properly. |
|
| When the washer displays |
|
| the “1E” code, the washer do |
|
| draining for 3 minutes. During |
|
| this time, the Power button is |
|
| inoperative. |
|
|
|
|
| Your Washer has tried to fill but | Make sure the water faucets are open all the |
| was unsuccessful. | way. Check for kinked hoses. |
| Check if the hot water supply | Check the inlet screens on the fill hoses. |
| hose is connected. | If you use a Flood Safety Device, then please |
|
| |
| When the washer displays | remove the device and connect the water hoses |
| directly to the unit. | |
| the “nF” code, the washer do | |
|
| |
| draining for 3 minutes. During | You must connect the hot water supply hose |
| this time, the Power button is | because hot water is supplied by the Auto |
| inoperative. | Temperature Control (A.T.C.) function. |
|
|
|
| Your washer is not draining. It can | Do the following: |
| also mean that the unit senses a | 1) Turn off the unit and turn it on again. |
| small clog while draining. | |
| 2) Select only the Spin Cycle. | |
|
| |
|
| 3) Press the Start/Pause to drain the water. |
|
| If it still does not drain, call for service. |
|
|
|
| Your Washer has tried to fill but | Call for service. |
| has not reached the proper water |
|
| level. |
|
| When the washer displays |
|
| the “LE” code, the washer do |
|
| draining for 3 minutes. During |
|
| this time, the Power button is |
|
| inoperative. |
|
|
|
|
| Unbalanced load prevented your | Redistribute the load, press the Start/Pause |
| Washer from spinning. | button. |
|
|
|
| Lid is open when washer is | Close the lid tightly and restart the cycle. If the |
| running. | code reappears, call for service. |
|
|
|
| Your washer failed to lock the lid. | Close the lid tightly and restart the cycle. If the |
|
| code reappears, call for service. |
|
|
|
| The door will not unlock. | Make sure the lid is firmly closed. |
|
| Push the Power button to turn off your washer, |
|
| then turn it on again. If the code reappears, call |
|
| for service. |
|
|
|
| Jammed Key. | Call for service |
|
|
|
troubleshooting _33
05 troubleshooting
2015/7/30 9:27:50