Selecting 
Mode
mode helps users to fall asleep well after going to bed whether
being too hot to sleep or being awakened by coldness. The 
mode can be selected only when the air conditioner is switched on or off in cool/heat mode.
1Press the 
(On/Off) button.
Result: The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2 Press the | button to select cool or heat mode. |
|
Result: | The indoor unit beeps each time you press the | button. |
| The air conditioner runs in cool or heat mode. |
|
3Press the 
button.
Result: The timer indicator is displayed.
The Off timer is blinking on the remote control.
4 To set the 
Off timer, press the 
buttons once or more times until the required Off time is displayed.
Result: The 
mode will be automatically stopped in
8 hours if the operation time is not set.
You can set the Off timer by pressing the 
buttons to
turn off the 
mode automatically at the appointed time within a range of 30 minutes to 12 hours.
Each time the 
buttons are pressed, the time is
increased by 30 minutes or 1 hour. 
mode will be stopped at the appointed off time.
5 Press the | button. |
|
|
|
|
Result: | The remaining time is displayed. |
|
| ||
Note | In the case of selecting | mode or adjusting the extra | |||
| time for | mode, you should press the | button | ||
| within 10 seconds. If you do not press the | button within | |||
| 10 seconds, |
| mode will be canceled automatically. | ||
6Press the 
button to adjust the temperature until the desired temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result: Each time you press the 
button;
-The temperature adjusts by 1°C
-The indoor unit beeps
08'VIVACE_CIS_28587A_IB_E.indd 18