ASSEMBLING THE VACUUM-CLEANER READY FOR USE
1)Connect the suction hose to the suction tube.
2)Connect the suction tubes together (depending on model).
3)Connect the nozzle to the suction tube.
4)Connect the hose clamper to the body of the cleaner.
*OPTION : ① Assemble the CYCLONIC FILTER with the handle and extension wand(depending on model).
➁Ajusting the telescopic tubes (depending on model)
*OPTION① |
*OPTION➁ |
EXTENDING : Holding narrow side of the telescopic tube with a hand, pull the handle to the
SHORTENING : Push the handle to the narrow side 
of the tube, hoding it with another
hand.
POWER CORD 
1. PULLING OUT
The power cord is long enough to be drawn 
out for a convenience.
2. REWINDING
Upon finishing cleaning disconnect the plug from the electrical outlet and just press the cord rewind button lightly with your toe.
NOTE :When removing the power cord from the electrical outlet, grasp the plug, not the cord.
3