Samsung VCC8285H3K/UMG, VCC8265H3S/UMG, VCC8245V3R/UMG manual Troubleshooting, Problem Solution

Page 15

Troubleshooting

	PROBLEM	SOLUTION

	Motor does not start	• Check cable, pulg and socket.
	Motor does not start	• Leave to cool.
		• Leave to cool.

	Suction force is gradually	• Check for blockage and remove.
	decreasing	• Check for blockage and remove.
	decreasing

	Cord does not rewind fully	• Pull the cord out 2-3m and push down the cord rewind button.

	Vacuum cleaner does	• Check hose and replace if required.
	not pick up dirt	• Check hose and replace if required.
	not pick up dirt

	Low or decreasing suction	• Please check ﬁlter and, if required, clean as illustrated in the
	Low or decreasing suction	instructions. if ﬁlters are out of condition change them to new ones.

04 TROUBLESHOOTING

troubleshooting _15

Image 15

Contents Vacuum Cleaner Safety Information Safety informationImportant Safeguards Contents Option Assembling the cleanerBODY-CONTROL Type / ON/OFF Type Operating the cleanerON/OFF Switch Power Cord POWER-CONTROLHandle Control Type Using AccessoryPipe Using AccesoryAccessory Maintain tools and ﬁ lterBlanket Brush Option Maintain Floor ToolsStep Brush Option PET Brush OptionTo Replace Brushroll Mini Turbo Brush OptionalWhen to clean the dust pack Check Filter IndicatorChanging the Dust BAG Cleaning Inlet Filter Cleaning the Outlet FilterCleaning the Cyclone Filteroption Change the Battery Optional Problem Solution TroubleshootingPage Page ƾƷŲǾǧȘȶȔƾƭųǈȚȯƾƪƳƄŴȚ ȸȤƾƸƄųȚǀƁȤƾƭƃŽȚǍƸƸưů ȜƾƇŵǍƓȚȶȝȚȶȢǈȚǀſƾƸǧȜƾƇŵǍƓȚȶȝȚȶȢǈȚǀſƾƸǧ ǀŮǍůǈȚǏƸżǍƸƸưů ǇŵǍƓȚǚųǋžǗƸƮƶůǑƃƲƓȚǠźǛƳƇƄŽȚ ǇŵǍƓȚǍŵƻžǑƇź ȒǀŮǍůǈȚǀƁȶƾŲǗƸƮƶůǠưƃƶƁǟƄžȜƾŵǍƱŽȚǀſȚǞƭŴȖȲȚǋƃƄŴǽ ǀƁȤƾƸƄųȚȜǍƸưƫŽȚǞŮǍƄŽȚȜƾŵǍźȜƾƇŵǍƓȚȶȝȚȶȢǈȚǀſƾƸǧ ǀŮǞƃſȖ ǗƇƴƓȚǀƉƶƳƓȚǚƸưƪů ȲǞŶǍƒȚ w ǀŻƾƭŽȚǙƴŴ ǀŻƾƭŽȚǠźǛƳƇƄŽȚǀƉƶƳƓȚǕƸƵƏ ȜƾƁǞƄƤȚ ǀžƾƷŽȚǀžǾƉŽȚȝƾŶƾƸƄŲȚ ǀžǾƉŽȚȝƾžǞƴƯžǀžǾƉŽȚȝƾžǞƴƯž ǀžǾƉŽȚȝƾžǞƴƯžǀƸǣƾŮǍƷƳŽȚǀƉƶƳƓȚ