1Preparations
1.3Installation
1.3.1 Attaching the Stand
Before assembling the product, place the product down on a flat and stable surface so that the screen
is facing downwards.
Insert the Stand Connector into the Stand in the direction shown by the figure.
Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards.
Check if the Stand Connector is firmly connected.
Hold the main body of the product with your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in the figure.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
- Caution
Do not hold the product upside down only by the stand.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
1 Preparations 22