Installing Your Microwave Oven

This microwave oven can be placed almost anywhere (kitchen work surface or shelf, movable trolley, table).

For your personal safety, this appliance must be:

•Properly earthed (3-pin plug)

•Plugged into a standard 127 Volt, 60 Hz, AC earthed socket.

20 cm	10 cm
above	behind
	10 cm
	of the side

1.Install the oven on a flat, level, stable surface. Make sure there is adequate ventilation for your oven with at least 10cm(four inches) of space behind, and on the sides of the oven and 20cm(eight inches) of above and that the oven is at least 85cm(thirty three inches) off the floor.

2. Remove all packing materials inside the oven. Install the roller ring and turntable. Check that the turntable rotates freely.

•Never block the air vents as the oven may overheat and automatically switch itself off. It will remain inoperable until it has cooled sufficiently.

•Plug the cable into a 3-pin, earthed socket. If the power cable of this appliance is damaged, it must be replaced by a special cable (references I-SHENG SP022, KDK KKP 4819 D, SAMIL SP-106B, MOONSUNG EP-48E or EUROELECTRIC 3410). Contact your local dealer to have it replaced. The power cable of S/AFRICA, U.A.E is EUROELECTRIC (3183Y), ISRAEL is PENCON (ZD16A) and NIGERIA, GHANA and KENYA is PENCON (UD 13A1) and SAUDI ARABIA is MOON SUNG SJT 14AWG, PENCON (UD13A1).

•DO NOT install the microwave oven in hot or damp surroundings.

•Example: Next to a traditional oven or radiator.

•The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven.

•Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

•This microwave oven has to be connected to the plug endurable to proper power consumption.

This microwave oven has to be positioned so that the plug is accessible.

4Safety