Installation Instructions, Separation of Turns

Installation Instructions

INSTALLATION INSTRUCTIONS EXHAUST

Installation and service must be performed by a qualiﬁed installer or service agency. IMPORTANT: Have your dryer installed properly.

NOTE: The WARNING and IMPORTANT instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution, and carefulness are factors that CANNOT be built into the dryer. These factors MUST BE supplied by the person(s) installing, maintaining, or operating the dryer.

Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can produce bodily injury and/or property damage.

This dryer comes ready for top exhausting.

WARNINGS

•DO NOT USE NON METALLIC FLEXIBLE DUCT.

•Never use ﬂexible duct inside the dryer.

•Do not terminate exhaust in a chimney, range hood, gas vent, ﬂoor or attic. The combination of lint and grease could create a ﬁre hazard or damage.

•Provide an access for inspection and cleaning the exhaust system at least once a year.

EXHAUST LENGTH

The MAXIMUM ALLOWABLE length of the exhaust system depends upon the type of duct, number of turns, the type of exhaust hood (wall cap), and all conditions noted below. The maximum allowable length for both rigid and ﬂexible metal duct is shown in table 1(next page). More than four 90˚ turns is not recommended.

EXHAUST SYSTEM CHECK LIST HOOD or WALL CAP

•Terminate in a manner to prevent back drafts or entry of birds or other wildlife.

•Termination should present minimal resistance to the exhaust air ﬂow and should require little or no maintenance to prevent clogging.

•Wall caps must be installed at least 300 mm (12”) above ground level or any other obstruction with the opening pointed down.

•If roof vents or louvered plenums are used, they must be equivalent to a 100 mm (4”) dampered wall cap, in regard to resistance to air ﬂow, prevention of back drafts and maintenance required to prevent clogging.

SEPARATION OF TURNS

Separate all turns by at least 1m(3ft.) of straight duct, including distance between last turn and dampered wall cap. If two turns must be closer than 1 m (3 ft.) deduct 3 m (10 ft.) from the maximum lengths shown in the table for each occurrence.

TURNS OTHER THAN 90˚

•One turn of 45˚ or less may be ignored.

•Two 45˚ turns should be treated as one 90˚.

•Each turn over 45˚ should be treated as one 90˚.

SEALING OF JOINTS

•All joints should be tight to avoid leaks. The male end of each section of duct must point away from the dryer.

•Do not assemble the duct work with fasteners that extend into the duct. They will serve as a collection point for lint.

•Duct joints can be made air and moisture-tight by wrapping the overlapped joints with duct tape.

INSULATION

•Duct work which runs through an unheated area or is near an air conditioning duct, should be insulated to reduce condensation and lint build up and be sloped down toward outdoors.

NOTE: Never install screen inside exhaust duct.

WARNING: THE DRYER MUST EXHAUST TO THE OUTDOORS.

TO PREVENT LARGE AMOUNTS OF LINT AND MOISTURE FROM ACCUMULATING AND TO MAINTAIN DRYING EFFICIENCY, THIS MACHINE MUST BE EXHAUSTED OUTDOORS.

SAMSUNG Clothes Dryers Owner’s Instructions A-1

DV665JS/XSG, DV665JW/YL, DV665JW/XSG specifications

The Samsung DV665JW/XSG, DV665JW/YL, and DV665JS/XSG are advanced washing machines that embody the cutting-edge technology and innovation characteristic of the Samsung brand. These models are designed with the modern consumer in mind, offering an array of features that enhance the laundry experience while delivering exceptional cleaning performance.

One of the standout features of these washing machines is the EcoBubble technology. This unique system creates bubbles from water and detergent, allowing for superior penetration into fabrics and effectively removing dirt and stains in cold water. This helps to conserve energy while maintaining excellent washing results, making it an eco-friendly choice for households.

The Samsung DV665 series also boasts a range of smart functions, featuring Wi-Fi connectivity that allows users to control the machine remotely through a mobile application. This means that consumers can start, stop, or monitor their laundry cycles from anywhere, providing added convenience in today's busy lifestyles. Users can also access a variety of customized wash cycles tailored to fit different types of fabrics and levels of soiling, ensuring optimal care for their clothes.

Another key characteristic of the DV665 models is their impressive load capacity. Designed to handle larger items and bulkier loads, such as comforters and blankets, these machines are equipped with spacious drum interiors that maximize washing efficiency without compromising on space. The design of the drum is also engineered to reduce fabric damage, ensuring longevity for your garments.

The Digital Inverter Motor is a highlight of the DV665 series, providing energy-efficient operation while minimizing noise during washing cycles. This motor is designed for durability and long life, giving users peace of mind knowing that their washing machine is built to last.

In addition to performance features, Samsung has also focused on user experience. The intuitive digital display makes it easy to navigate through settings and select the appropriate cycle for each load. The sleek, modern aesthetics of the machine—available in various colors—also add a touch of sophistication to any laundry room.

With a combination of powerful technology, smart features, and user-friendly design, the Samsung DV665JW/XSG, DV665JW/YL, and DV665JS/XSG washing machines stand out as exemplary choices for consumers seeking efficiency and reliability in their laundry solutions.