Samsung LH55PHFPBGC/CH, LH43PMFPBGC/EN manual Standard signal mode table, MAC, 640 x, MAC, 832 x

Page 83

Chapter 7. Appendix

83

Standard signal mode table

This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.

Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85 Hz, change the vertical frequency to 60 Hz using the CDT product before you exchange it with the LCD product.

Model Name

 

 PM32F / PM43F / PM49F / PM55F

 

 

PH43F / PH49F / PH55F / PH43F-P / PH49F-P / PH55F-P

Synchronization

Horizontal frequency

30

- 80 kHz

 

 

 

 

 

Vertical frequency

60

- 75 Hz

 

 

 

Resolution

Optimum resolution

1920 x 1080 @ 60 Hz

 

 

 

 

Maximum resolution

1920 x 1080 @ 60 Hz

 

 

 

 

Horizontal frequency

The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz.

Vertical frequency

The product displays a single image multiple times per second (like a fluorescent light) to display what the viewer sees. The rate of a single image being displayed repeatedly per second is called vertical frequency or refresh rate. Vertical frequency is measured in Hz.

The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power LED on. In such a case, change the settings according to the following table by referring to the graphics card user manual.

Resolution

Horizontal Frequency (kHz)

Vertical Frequency (Hz)

Pixel Clock (MHz)

Sync Polarity

 

 

 

 

 

H

V

IBM, 720 x 400

31.469

70.087

28.322

+

 

 

 

 

 

 

MAC, 640 x 480

35.000

66.667

30.240

 

 

 

 

 

 

MAC, 832 x 624

49.726

74.551

57.284

 

 

 

 

 

 

Image 83
Contents Page Table of contents Troubleshooting Copyright SymbolsAbout this manual Electricity and safety SafetySafety precautions Children may suffocate InstallationChildren may become injured or seriously harmed OperationProduct may fall and become damaged or cause an injury StoragePrecautions when handling the panel CleaningWhat’s Included Device setupInstallation Remote sensor PartsPanel key Remote sensor and spacer logo optionalSpacer logo optional Reverse sideRJ45 Anti-theft lockTo lock an anti-theft locking device Port DescriptionPIM slot Plug In Module Sold separatelyVOL Remote controlTo place batteries in the remote control Ventilation Guided installationInstallation on a perpendicularwall Installation on an indented wallWall mount kit specifications Vesa Wall mount installationPreparing before installing wall mount Installing the wall mountPH49F-P Unit mmModel name  RS232C Cable External connectionCheckpoints Cable ConnectionCross LAN cable PC to PC LAN CableDirect LAN cable PC to HUB Connection Viewing control state Get control commandControlling Set control command Control CodesPower control CommandInput source control Volume controlSetting the picture size Set Picture Size Screen mode controlSetting the input source Set Input Source Viewing screen status Get Screen Mode StatusViewing PIP on/off state Get the PIP ON/OFF Status Screen size controlPIP On/Off control Viewing the screen size Get Screen Size StatusVideo Wall Mode Control Auto adjustment control PC and BNC onlyFull Natural Safety LockSetting the video wall Set Video Wall Mode Viewing the safety lock state Get Safety Lock StatusVideo Wall User Control Video Wall OnSet Number Data 0x01 0x02 0x63 100 0x64 10x10 Video Wall Model 1 ~PC connection Connection using a DVI cable Digital typeConnection using a D-SUB cable Analog type  System → General → set Hdmi Hot Plug to Off Connection using an HDMI-DVI cable Sound → set Hdmi Sound to Pcdvi Precautions for using DP Connection using an Hdmi cableConnection using an DP cable ‒‒ Sound → set Hdmi Sound to Avhdmi AV connectionAudio system connection Connection using an Hdmi cable up to 1080pEdit LAN connectionSource selection SourcePC software Multiple Display Control Installation/uninstallationUninstallation Connection Using the RS-232C cableUsing the ethernet cable Connection using a direct LAN cableConnection using a cross LAN cable Home → Player → Viewing contentHome screen PlayerAvailable menu When content is runningFile formats compatible with Player Control buttons on the remoteRestrictions Template files and LFD.lfd filesContents Image Power PointVideo AudioSupported in Network Channel and Local Channel Template filesClone Product URL Launcher SettingSchedule URL LauncherPC Connection Cable ID SettingsDevice ID Device ID Auto SetVideo Wall Video WallNetwork Status On Timer Picture ModeOn/Off Timer  Off / On Off TimerTicker Home → Ticker →Approving a connected device from the server Select Edit  Setup Select Time Zone Setting the current timePicture Screen adjustment2nd 3rd Picture Mode MenuWhen this setting is on, only UHD products are supported Hdmi Black Level Film ModeAuto Adjustment Image ResetPicture Off Reset PictureImmediate display OnScreen display adjustmentTimer OnScreen Display2nd 3rd Description Language Set the menu language Audio receiver. If this occurs, set the product to External Sound adjustmentIf Sound Output is set to External, Auto Volume is disabled SoundNetwork NetworkNetwork Connecting to a Wired Network Network Settings WiredHow to set up manually Automatic Network Settings WiredManual Network Settings Wired How to set up automaticallyAutomatic Network Setup Wireless Network Setting WirelessConnecting to a Wireless Network Select Add Network Manual Network Setup WirelessHow to set up using Wpspbc System SystemMessage to On Power Control Auto Power OnAuto Power Off Power ButtonEco Solution Energy Saving Mode No Signal Power OffUSB Auto Play Lock Security Safety LockChange PIN Button LockLogo Display Time Game ModeReset System Custom LogoSystem menu Troubleshooting forAnynet+Anynet+ HDMI-CEC Anynet+ HDMI-CECProblem Possible Solution Anynet+ device Support SupportDiagnosis TroubleshootingScreen Resolution Before you contact us Not Optimum Mode is displayed Installation issue PC modeScreen issue Adjust Brightness and Contrast Go to Sound and change Sound Output to Internal Sound issueOther issue Remote control issueSource device issue Defined resolution is not supported. appears Question Answer How can I change the frequency? Frequently asked questionsGeneral SpecificationsAppendix Plug-and-Play MAC, 832 x Standard signal mode tableMAC, 640 x VESA, 1152 x VESA, 640 xVESA, 800 x VESA, 1024 xOthers Product damage caused by customer’s faultNot a product defect Prevention of afterimage burn-in What is afterimage burn-in?Optimum picture quality and afterimage burn-in prevention Optimum picture qualityOZ348 2030 UA102 2110 Preventing afterimage burn-inOpen Source Licence Notice License
Related manuals
Manual 106 pages 12.52 Kb Manual 2 pages 14.49 Kb Manual 87 pages 42.21 Kb Manual 85 pages 27.41 Kb Manual 88 pages 62.34 Kb Manual 2 pages 16.4 Kb Manual 2 pages 18.27 Kb Manual 87 pages 10.83 Kb Manual 87 pages 34.06 Kb Manual 86 pages 54.19 Kb Manual 106 pages 22.27 Kb Manual 106 pages 58.74 Kb Manual 106 pages 7.27 Kb Manual 89 pages 12.2 Kb Manual 90 pages 42.67 Kb Manual 90 pages 39.46 Kb Manual 91 pages 40.68 Kb Manual 89 pages 59.02 Kb Manual 90 pages 36.39 Kb Manual 87 pages 7.51 Kb Manual 88 pages 4.1 Kb Manual 87 pages 6.28 Kb Manual 87 pages 12.52 Kb Manual 88 pages 55.71 Kb Manual 88 pages 2.02 Kb Manual 88 pages 27.14 Kb Manual 91 pages 18.79 Kb Manual 84 pages 39.01 Kb Manual 88 pages 24.84 Kb Manual 2 pages 22.84 Kb

LH49PMFPBGC/XV, LH43PHFPBGC/CH, LH55PMFPBGC/CH, LH55PHFPBGC/XV, LH55PMFPBGC/XV specifications

Samsung has established itself as a leader in the realm of display technology, and its latest lineup, including models LH43PMHPBGC/XV, LH43PMFPBGC/XV, LH49PMHPBGC/XV, and LH55PMHPBGC/XV, continues to demonstrate innovation and versatility in commercial displays. These models are engineered to meet the rigorous demands of various environments such as retail, corporate settings, and public spaces, showcasing exceptional performance and cutting-edge features.

One of the standout characteristics of these displays is their impressive picture quality. With Ultra HD (4K) resolution, they offer stunning clarity and vibrant colors, ensuring that content stands out and captures the attention of viewers. The high pixel density makes these displays ideal for showcasing intricate graphics, detailed images, and video content.

Samsung's advanced HDR technology enhances this further, providing a broader range of colors and improved contrast. This ensures that content is presented as intended, whether it's a promotional video in a store or critical data in a conference room. The combination of HDR with high brightness levels means that these displays remain visible even in well-lit environments, making them perfect for varied lighting conditions.

Durability is another key feature of the Samsung LH series. They are built to withstand the rigors of continuous operation, making them suitable for use in high-traffic areas. The panels are designed to have a long lifespan, reducing the need for frequent replacements and lowering total cost of ownership.

Connectivity is advanced in these models, featuring multiple input options that accommodate various devices. This ensures seamless integration into existing systems and networks. The displays support popular content management software, allowing users to easily schedule and manage content across multiple screens.

Additionally, they boast a sleek and professional design that fits well in any environment. The ultra-narrow bezels provide a near-seamless video wall experience when multiple screens are used together, creating an immersive visual experience.

Other innovative technologies integrated into these models include Samsung's proprietary MagicINFO software. This allows for effortless content creation, scheduling, and management, making it easier for businesses to communicate their messages effectively.

In summary, the Samsung LH43PMHPBGC/XV, LH43PMFPBGC/XV, LH49PMHPBGC/XV, and LH55PMHPBGC/XV displays exemplify cutting-edge technology, offering superior picture quality, durability, connectivity options, and ease of use. These models are tailored for various commercial applications, ensuring that they meet the high standards demanded by today's businesses.