Samsung SPL300WX/XY, SPL300WX/EN, SPL300WVX/ZN, SPL300WVX/XT Connecting using a Video/S-Video cable

First, check that the AV device and your projector are turned off.

Connect the [PC IN (1 or 2)] terminal at the back of the projector to the Component terminal of your AV device using a D- Sub/Component cable (Not supplied).

- For supported input signals, refer to the "AV Timing(D-Sub)".

Connect the [PC 1/DVI AUDIO IN] or [AUDIO IN 2] terminal at the back of the projector and the Audio out terminal of your AV device using an audio cable (Not supplied).

Connecting using a Video/S-Video cable

First, check that the AV device and your projector are turned off.

Connect the [VIDEO] or [S-VIDEO] terminal and the AV device using a Video cable (Not supplied) or S-Video cable (Not supplied).

- For supported input signals, refer to the "AV Timing(VIDEO/S-VIDEO)".

Connect the [AV IN R-AUDIO-L] terminal at the back of the projector and the Audio out terminal of your AV device using an audio cable (Not supplied).