CONNECTIONS
CONNECTIONS
●● Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete.
●● Before moving or installing this product, be sure to turn off the power and disconnect the power cord.
CONNECTING THE SUBWOOFER
CONNECTING TO THE SUBWOOFER AUTOMATICALLY
The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly) automatically when the main unit and subwoofer are turned on. When the subwoofer is completely connected, the blue LED Link Indicator on the subwoofer stops blinking and glows continuously. See the indicator modes below:
1 | blue | |
| ||
|
|
|
2 | blue | |
| blinking |
|
3 | blue | a. Is the power cord plugged into the outlet? If not, connect the power plug to the outlet. |
| is not lit | b. If the power cord is plugged in correctly, check the main unit. If your main unit is off (in standby |
|
| mode), the subwoofer will also be in standby mode and the blue LED won't be lit. |
CONNECTING TO THE SUBWOOFER MANUALLY
If the indicator on the rear of the subwoofer does not light in blue, the subwoofer has not automatically connected. If this occurs, follow the directions below to connect the subwoofer manually.
●● Important: Before you begin, put the battery into the remote. See page 11 for instructions.
1. Plug the power cords of the main unit and subwoofer into an AC wall outlet.
2. Press the ID SET button on the rear of the subwoofer with a small, pointed object for 5 seconds.
• The LINK indicator (Blue LED) on the subwoofer blinks quickly.
3. | Press the | button on your remote control for 5 seconds while the main unit is turned OFF. | ||
4. | The ID SET message appears on the display of the main unit for a short period of time, and then disappears. | |||
5. | While the subwoofer's indicator is blinking blue, press the |
| button on your remote control or on the right side of the main | |
| ||||
6. | unit to turn on the main unit. |
|
| |
The connection is complete if the indicator on the rear of the subwoofer stops blinking and glows continuously. | ||||
• The main unit and the subwoofer should now be linked (connected).
• The LINK indicator (Blue LED) on the subwoofer should be glowing continuously and not blinking.
• If the LINK indicator is not solid blue, the linking process has failed. Turn off the main unit and start again from Step 2.
• You can enjoy better sound from the wireless subwoofer by selecting a Sound Effect. (See page 9)
17