Samsung HW-J355/UM manual Usb, ++Before you connect a USB device

USB

You can play music files located on USB storage devices through the Soundbar.

USB port Display

FUNCTIONS

ENG

1.Connect the USB device to the USB port of the product.

2.Press the ( ) button on the main unit’s top panel

or the (SOURCE) button on the remote control to select the USB mode.

3.USB appears on the display screen.

●●The Soundbar connection to the USB device is complete.

●●The Soundbar automatically turns off (Auto Power Off) if no USB device has been connected for more than 5 minutes.

++Before you connect a USB device

Be aware of the following:

●●If the file name of a file or folder on a USB device exceeds 10 characters, it is not displayed on the Soundbar's display.

●●This product may not be compatible with certain types of USB storage media.

●●The Soundbar supports the FAT16 and FAT32 file systems.

--The NTFS file system is not supported.

●●Connect USB devices directly to the USB port of the product. Otherwise, you may encounter a USB compatibility problem.

●●Do not connect multiple storage devices to the product via a multi-card reader. It may not operate properly.

●●Digital camera PTP protocols are not supported.

●●Do not remove the USB device while it is transferring files.

●●DRM-protected music files (MP3, WMA) from commercial web sites cannot be played.

●●External HDDs are not supported.

●●Mobile phone devices are not supported.

●●File Format Type Compatibility list:

Format	Codec	Sampling Rate	Bitrate
	MPEG 1 Layer2
*.mp3	MPEG 1 Layer3		80kbps~320kbps
	MPEG 2 Layer3
	MPEG 2.5 Layer3	16KHz ~ 48KHz
	Wave_Format_
*.wma	MSAudio1		56kbps~128kbps
	Wave_Format_
	MSAudio2
	AAC		48kbps~320kbps
*.aac	AAC-LC	16KHz ~ 96KHz	128kbps~192kbps
	HE-AAC	24KHz ~ 96KHz	48kbps~64kbps
*.wav	-	16KHz ~ 48KHz	up to 3000kbps
*.ogg	OGG 1.1.0		50kbps~500kbps
*.flac	FLAC 1.1.0,	16KHz ~ 96KHz	up to 3000kbps
	FLAC 1.2.1

19