Connecting
External Components
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
(not supplied)
Audio Cable
If the external analog component has only one Audio Out, connect either left or right.
1 Connect Audio In on the DVD player to Audio Out on the external analog component.
•Be sure to match connector colors.
2 Press AUX/PORT to select AUX 1.
• ‘AUX 1’ appears in the display.
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
OPTICAL:Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver(Set | ENG |
| Optical Cable |
|
| (not supplied) | CONNECTIONS |
| Extermal Digital Component | |
|
| |
1 | Connect the Digital Input(OPTICAL) on the Mini Component to the Digital Output of the |
|
| external digital component. |
|
2 Press the AUX/PORT button to select DIGITAL IN.
Connecting the FM Antennas
AUX2 : Rear Panel
Audio Cable (not supplied)
If the external analog component has only one Audio Out, connect either left or right.
1
2
Connect AUX IN 2 (Audio) on the MINI COMPONENT
rear panel to the Audio Out of the external analog component.
■Be sure to match connector colors.
Press the AUX//PORT button to select <AUX2> input. The mode switches as follows : AUX 1 ➝ AUX 2.
FM Antenna (supplied)
FM antenna connection
1. Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FM antenna.
15
Note | • This unit does not receive AM broadcasts. | 16 |
|
|