Samsung MAX-DC650F/UMG Before Calling for Service, Handling discs, Handling and Storing Discs

Page 31

Cautions on Handling and Storing Discs

Small scratches on the disc may reduce sound and picture quality or cause breaks in playback. Be especially careful not to scratch discs when handling them.

Handling discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface.

Do not stick paper or tape on the disc.

Handling and Storing Discs

When you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

When cleaning, wipe gently from the inside to the outside of the disc.

Note Condensation may form if warm air comes into contact with cold parts inside the player. When condensation forms inside the player, the player

may not operate correctly. If this occurs, remove the disc and let the player stand for 1 or 2 hours with the power on.

Precautions When Using Audio Cassettes

Check that the tape in the cassette is sufficiently taut.

To prevent erasing a cassette that you wish to keep, remove the safety tab on the upper edge of the cassette. To record a cassette, where the tab has been broken, simply cover the opening with adhesive tape.

When you have finished playing a cassette, always put it back in its case.

Store your cassettes in a clean place, out of direct sunlight, where they will not be exposed to high temperatures.

Avoid using 120-minute cassettes as they place unnecessary strain on the tape mechanism.

Before Calling for Service

Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.

Symptom

 

Check/Remedy

 

 

 

 

 

 

 

 

Disc tray does not open.

Is the power cord plugged securely into the outlet?

 

 

Turn off the power and then turn it back on.

 

 

 

 

Playback does not start.

Check the region number of the DVD.

 

 

DVD discs purchased from abroad may not be playable.

 

 

CD-ROMs and DVD-ROMs cannot be played on this DVD

 

 

 

player.

 

 

Make sure that the rating level is correct.

 

The remote control does

Is the remote control being operated within its operation range of

 

not work.

 

angle and distance?

 

Are the batteries exhausted?

 

 

 

 

 

 

 

Playback does not start

Are you using a deformed disc or a disc with scratches on

 

immediately when the

 

the surface?

 

Play/Pause button is pressed.

Wipe the disc clean.

 

 

 

 

 

 

Sound is not produced.

No sound is heard during fast playback, slow playback, and step

 

 

 

motion playback.

 

 

Are the speakers connected properly? Is the speaker setup

 

 

 

correctly customized?

 

 

Is the disc severely damaged?

 

 

 

 

Picture does not appear, sound

Was the DVD player suddenly moved from a cold place to a warm

 

is not produced, or the disc

 

one? When condensation forms inside the player, remove the disc

 

tray opens 2 to 5 seconds later.

 

and let the player stand for 1 or 2 hours with the power on. (You

 

 

can use the player again after condensation disappears.)

 

 

 

 

 

 

 

• Disc is rotating but no

Is the TV power on?

MISCELLANEOUS

picture is produced.

Are the video cables connected properly?

• Picture quality is poor and

Is the disc dirty or damaged?

 

 

 

picture is shaking.

A poorly manufactured disc may not be playable.

 

 

 

 

 

 

 

 

59

60

Image 31
Contents DVD Mini Component System Safety Warnings Precautions Contents Front Panel DescriptionInsert Remote Batteries Range of Operation of the Remote ControlPosition of the DVD Player Connecting the SpeakersConnecting to a TV Directions in Installing SpeakerConnections Connecting to a TVCon’tWhat is Progressive or Non-Interlaced Scanning? Selecting the Video FormatAudio Cable FM antenna connectionChecking the Remaining Time Press the Remain button Setting the ClockDisc Playback Selecting a CD in the Disc changerDivX Playback To stop playback, press the Stop button To play a file in the USB menu screenCompatible Devices During playback, press the button Connectcable. the USBSlow Playback Fast/Slow PlaybackDisplaying Disc Information Fast Playback DVD VCD CD MP3Playing Frame by Frame DVD Skipping Scenes/Songs Angle FunctionBriefly press Press Cursor button to move to Angle displayRepeat Playback To Select a Repeat Playback Mode Disc Information ScreenZoom Screen Enlarge Function ↔ B Repeat Playback Zoom FunctionPress REP. A↔ B Buttons to move to time display 1Press Info buttonPress the numeric buttons Press the numericJpeg File Playback Jpeg Slide Mode Digest FunctionRotate/Flip Function Press Menu button Using Disc MenuUsing the Title Menu Press Menu button to exit the setup screenCode Language Language Code ListSetup Adjusting the TV Aspect Ratio Screen SizePress Enter button Press Menu button Press Cursor Setting the PasswordEnter the password Then press Enter button Press Return button to return to the previous levelPress Menu Setting the Wallpaper Jpeg DVDSetting the Wallpaper To Change the Wallpaper 1PLAY/PAUSE button when the image you like comes upIf DRC is Selected, press AV Sync SetupPress Cursor , to adjust the ‘DRC’ Press the Menu buttonListening to Radio Presetting StationsRadio Operation Standby on Listening to a CassettePress Tape on the player to select the Tape function Press Dubbing Recording a Compact DiscSynchronised recording STANDBY/ONSelect Tuner function By pressing Switch the system On by pressingRecording a Radio Program Direct recordingCanceling the Timer Timer FunctionTIMER/CLOCK until Timer is displayed Press Mute button Selecting Sound ModeXT Function Press Sleep buttonDemo Function / Dimmer Function Handling and Storing Discs Before Calling for ServicePrecautions When Using Audio Cassettes Handling discsDisc Recording Format SWoption Specifications

MAX-DC650T/CDM, MAX-DC650F/XSG, MAX-DC650F/HAO, MAX-DC650F/UMG, MAX-DC650F/SIM specifications

The Samsung MAX-DC650F and MAX-DC650T series are cutting-edge digital multifunction devices designed for high-performance environments, particularly in office settings. These models, including MAX-DC650F/SIM, MAX-DC650F/UMG, MAX-DC650F/HAO, MAX-DC650F/XSG, and MAX-DC650T/CDM, cater to the diverse needs of businesses with their advanced features, technologies, and characteristics.

One of the standout features of the MAX-DC650F series is its impressive multifunctionality. These devices combine printing, copying, scanning, and faxing capabilities in a single, space-saving unit. With a maximum print speed of up to 65 pages per minute, the MAX-DC650F series ensures rapid document processing, which is essential for busy workplaces. The devices also support high-resolution printing, delivering crisp and professional-quality documents every time.

The MAX-DC650F and MAX-DC650T series leverage advanced printing technologies, including Samsung’s unique VIVID Color technology. This technology enhances color reproduction, producing vibrant and vivid images that are suitable for marketing materials and presentations. Furthermore, these devices are equipped with automatic duplex printing, which reduces paper usage and costs while promoting environmentally friendly practices.

User convenience is a fundamental design principle of the MAX-DC650F series. The intuitive touchscreen interface simplifies navigation and allows users to easily access various functions without extensive training. Additionally, Samsung’s Mobile Print app supports printing from smartphones and tablets, making it easier for employees to print on-the-go.

Security is another critical aspect of the MAX-DC650F and MAX-DC650T series. These devices are designed with robust security features, including user authentication, secure printing options, and data encryption. This ensures that sensitive documents remain protected, giving businesses peace of mind.

In terms of connectivity, these models offer versatile options such as USB, Ethernet, and wireless capabilities, enabling seamless integration into any office network. They also support various document formats, making them versatile in handling different types of tasks.

Moreover, the MAX-DC650F/SIM, MAX-DC650F/UMG, MAX-DC650F/HAO, MAX-DC650F/XSG, and MAX-DC650T/CDM variants provide unique configurations and specs tailored to meet specific operational needs, ensuring that each business can find a perfect match for their requirements.

In summary, the Samsung MAX-DC650F and MAX-DC650T series stand out in the multifunction printer market due to their high-performance features, advanced technologies, and user-friendly characteristics, making them an ideal choice for modern offices aiming to enhance productivity while maintaining a high standard of print quality.