Recording a Radio Programme
GB
You can record a radio programme of your choice.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
1 | Switch the system on by pressing On/Standby. |
2 | Insert a blank cassette in Deck 2. |
3 | Select the TUNER function by pressing TUNER . |
4 | Select the radio station that you wish to record by pressing Tuning |
or on the remote control or by press the Tuning Down or Up on the front panel.
5 | Press REC/Pause. |
| |
| Result: REC is displayed in red and recording starts. |
| |
6 | When you have finished recording, press the TAPE |
| on the |
| |||
|
remote control or |
| on the front panel to stop recording. |
| ||
|
|
|
| 3 |
1 | 6 |
|
4 | 4 |
5
Copying a Cassette (Dubbing)
You can copy a cassette from Deck 1 to Deck 2. Two options are available:
Normal speed dubbing
You do not need to adjust the volume, as it has no effect on the recording.
Take care not to insert the tape to be copied in Deck 2, as it will be erased when you start recording.
1 | Switch your system on by pressing On/Standby. | |
2 | Insert a blank cassette in Deck 2. |
|
3 | Insert the tape to be copied in Deck 1. |
|
4 |
|
|
To copy a cassette at... | Press... | |
| Normal speed | Normal |
| High speed | High |
Result: The appropriate indications are displayed and the cassette in Deck 1 is copied to the cassette in Deck 2.
16
5 Press on the front panel or TAPE on the remote control when you have finished recording.
1 | 5 |
| |
| 4 |
| 4 |
Tape Counter(MAX-L42)
When playing a cassette, a counter is displayed to enable you to take note of the counter value at the start of each track and thus start playback at the beginning of the track to which you wish to listen.
The counter is only displayed when a cassette is being played.
Before starting to record a cassette for which you wish to take note of the counter values at the beginning of each track, reset the counter by pressing Counter Reset.
Selecting the Cassette Playback Mode (Deck 2 Only)(MAX-L45)
Your
Press REV. Mode until the appropriate symbol is displayed.
When the display indicates... The
One side of the selected cassette and then stops.
One side of the cassette.
The other side of the cassette and then stops.
Both sides of the cassette indefinitely until you press stop.