Samsung MM-D320/ZN, MM-D320/UM manual Setting the Clock, Result The minutes flash

DISPLAY function

ENG

You can view all functions available on the display, adjust the brightness of the display.

Each time you press the DISPLAY button on the remote control, the display mode will change as follows:

The Demo function

All functions available on the system appear on the front panel display.

The Dimmer function

The Dimmer function is selected and the display darkens.

Display ON

The Display turns on.

Clock ON

The Clock you set is displayed.

DISPLAY	CD REC		DISC SKIP
	SPEED	USB REC
			CD
TIMER	TIMER/CLOCK		SLEEP

Setting the Clock

Your system is equipped with a clock which allows you to turn your system on and off automatically.

You should set the clock:

When you first purchase the micro-compact system

After a power failure

After unplugging the unit

For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

1	Switch the system on by pressing POWER.
2	Press TIMER/CLOCK twice.
3	Result: CLOCK is displayed.
	Press ENTER (	) .
	Result: The hour flashes.
4
	To...	Press the TUNING/ALBUM button
	Increase the hours
	Decrease the hours
5	When the correct hour is displayed, press		ENTER (		) .
	Result: The minutes flash.
6
	To...	Press the TUNING/ALBUM button
	Increase the minutes
	Decrease the minutes
7	When the correct time is displayed, press (			) .
	Result: The clock starts and is displayed.

You can display the time, even when you are using another function, by pressing TIMER/CLOCK once.

You can also use , buttons on the main unit to instead of . TUNING/ALBUM button or in step 4, 6.

DISPLAY	SPEED	USB REC	DISC SKIP
			CD
TIMER	TIMER/CLOCK		SLEEP
ON/OFF
REPEAT	REPEAT
SOUND	TUNING /ALBUM		EQ
VOL			VOL

TUNING /ALBUM

MO/STTUNING

USB REC

8