![](/images/new-backgrounds/1177526/17752655x1.webp)
![](/images/new-backgrounds/1177526/17752655xi2.webp)
Timer Function
• The timer enables you to switch the system on or off at specific times.
• If you no longer want the system to be switched on or off automatically, you must cancel the timer.
• Before setting the timer, check that the current time is correct.
• For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
Example: You wish to wake up to music every morning.
![](/images/new-backgrounds/1177526/17752655xi7.webp)
Canceling the Timer
After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it.
1 Switch the system on by pressing
POWER.
Press
2 TIMER/CLOCK until TIMER is displayed.
Press the ENTER
3 button.
•ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any
To cancel the timer, press TIMER
ON/OFF once.
• is no longer displayed.
4 Set the timer switch-on time.
a. Set the hour by pressing or
button.
b. Press ENTER .
•The minutes flash.
c.Set the minutes by pressing or
button.
d.Press ENTER.
•OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch- off time already set; you can now set the timer
5 Set the timer switch-off time.
a. Set the hour by pressing or button.
b. Press ENTER.
•The minutes flash.
c.Set the minutes by pressing or
button.
d.Press ENTER.
•VOL 10 is displayed, where 10 corresponds to the volume already set.
Press or
button
6 to adjust the volume level and press
ENTER.
•The source to be selected is displayed.
To resume the timer, press TIMER
ON/OFF again.
• is displayed again.
Note |
• You can cancel the timer while the power is on or while the player is in standby.
Press or
button
7 to select the source to be played when the system switches on.
•TUNER (radio) : a Press ENTER. b Select a preset
station by pressing
or
.
•DVD/CD (compact disc) : Load on a disc.
•USB :Insert a USB.
Press ENTER to
8 confirm the timer.
Press POWER to
9 set the system to standby mode.
• is displayed to the top right of the time, indicating that the timer has been set.
•The system will switch on and off automatically at the required times.
MISCELLANEOUS
Note | • | If the timer switch on and off times are identical, the word ERROR is displayed. |
| ||
53 | •You can also use Multi Jog or | button on the front panel to instead | , | button on the | |
| remote control in step 4,5,6,7. |
|
|
|
54