Selecting the cassette Playback Mode

Selecting the Cassette Playback Mode

Timer Function

• The timer enables you to switch the system on or off at specific times.

• If you no longer want the system to be switched on or off automatically, you must cancel the timer.

• Before setting the timer, check that the current time is correct.

• For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.

Example: You wish to wake up to music every morning.

Your micro component system has three cassette playback modes which enable you to listen to both sides of a cassette

automatically.

Press REVERSE MODE until the appropriate symbol is displayed.

Switch the system	Press
Switch the system	TIMER/CLOCK
on by pressing	until TIMER is
1 POWER.	2 displayed.

Press the ENTER

3 button.

•ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time.

•When the display indicates...The micro component system plays back

One side of the selected cassette and then stops.

One side of the cassette.

The other side of the cassette and then stops.

Both sides of the cassette indefinitely until you press stop.

Set the timer		Set the timer
4 switch-on time.		5 switch-off time.
a. Set the hour by pressing	or	a. Set the hour by pressing	or
button.		button.
b. Press ENTER.		b. Press ENTER.
• The minutes flash.		• The minutes flash.
c. Set the minutes by pressing	or	c. Set the minutes by pressing	or
button.		button.
d. Press ENTER.		d. Press ENTER.
• OFF TIME is displayed (instead		• VOL 10 is displayed, where 10
of the equalizer symbols) for a few		corresponds to the volume
seconds, followed by any switch-		already set.
off time already set; you can now
set the timer switch-off time.

Press or button

6 to adjust the volume level and press

ENTER.

•The source to be selected is displayed.

Press or button	8	Press ENTER to
to select the source to
		confirm the timer.
be played when the

7 system switches on.

•TAPE (cassette) : Insert a cassette tape.

•TUNER (radio) : a Press ENTER. b Select a preset

station by pressing Tuning or .

•CD (compact disc) : Load a compact disc.

•USB :Connect the USB.

Press POWER to

9 set the system to standby mode.

• is displayed to the top-right of the time, indicating that the timer has been set.

•The system will switch on and off automatically at the required times.

MISCELLANEOUS

	Note	50
	• If the timer switch on and off times are identical, the word ERROR is displayed.	50