Samsung MAXDN65FH/UMG, MAXDN65FH/XSG manual Connecting the Loudspeakers

Connecting the Loudspeakers

GB

SUB

WOOFER

PRE OUT

FM 75Ω

AM ANT.

S-VIDEO	DIGITAL OUT
OUT	OPTICAL

VIDEO
OUT
	LINE OUT
CENTER SPEAKER
(6Ω )	AUX IN
SURROUND
SPEAKER
(6Ω )
	FRONT
	SPEAKERS
	(6Ω )

(+) (–) (+) (–)

FRONT

SPEAKERS

(6Ω )

The loudspeaker connector terminals are locat- ed on the rear of the system.

There are four terminals on the system:

Two for the left speaker (marked L)

Two for the right speaker (marked R)

To achieve the correct sound quality, connect the:

Red wire to the + terminals

Black wire to the – terminals

1	To connect a wire to a terminal, push the tab as far
	as it will go:
	To the right on the system
2	Insert the wire, up to the plastic sheathing, in the hole.
3	Push the tab back:
	To the left on the system, until it clicks into place
	To the top on the loudspeaker
	Result: The wire is pinched and held firmly in place.
4	Repeat the operation for each wire.

Connecting the Center Speaker/ Surround Speaker

CENTER SPEAKER

(+)(–)

CENTER SPEAKER

(6Ω )

	L
	SURROUND
SUB	SPEAKER
PRE OUT
WOOFER
	(6Ω )

FM 75Ω	R
	AM ANT.
S-VIDEO	DIGITAL OUT
OUT	OPTICAL

VIDEO
OUT
	LINE OUT
CENTER SPEAKER
(6Ω )	AUX IN
SURROUND
SPEAKER
(6Ω )
	FRONT
	SPEAKERS
	(6Ω )

(+) (–) (+) (–)

Connect the CENTER SPEAKER.

Connect the center speaker cord to the CENTER SPEAKER terminal.

Connect the SURROUND SPEAKERS.

There is no difference between the surround speakers. Both speakers can be connected as R (right) or L (left).

Connect the surround speaker cords to the SUR- ROUND SPEAKERS terminals.

SURROUND SPEAKER	SURROUND SPEAKER
(right)	(left)

8