DEMO Function / DIMMER Function/ 
ECO Function
CD RIPPING Function | ENG |
|
You can rip a compact disc as a MP3 file on the USB
This feature enables you to ripping with the start of the disc or track of your choice.
DEMO Function
You can view the various functions available on your system.
Press DEMO/DIMMER button.
•The various functions available are listed in turn on the
display.
•All these functions are described in detail in this booklet. For instructions on how to use them, refer to the
appropriate sections.
DIMMER Function
You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.
1 Switch the system on by pressing
STANDBY/ON.
Press CD
4 RIPPING button on remote control to starting ripping.
If the system is either at pause or playing state,turn the CD RIPPING dial down or press CD RIPPING button on the remote control to start the ripping for the current track.
Turn CD RIPPING dial up or press and hold CD RIPPING button on the remote control to start ripping the all tracks of Disc.
“CD Ripping” is displayed in red and CD RIPPING starts.
During CD ripping, do not disconnect USB device.
2 | Connect the |
| |
| USB. |
5 | To stop ripping, press |
STOP button.and | |
then automatically |
create and save as the MP3 file.
After
Load a compact
3 disc(Digital Audio).
Press the OPEN/CLOSE button to open the disc tray.
Insert a CD and press the OPEN/CLOSE button to close the disc tray.
Use the CD selection ( 
) buttons to select the desired song.
Press DEMO/DIMMER button.
• Each time the button is press, the brightness changes as
follows: DIMMER ON(Dim) ➞ DIMMER OFF(Bright).
To cancel this function, press
DEMO/DIMMER again.
ECO Mode Function
You can save the power consumption while the unit is turned off(on standby).
•To activate the ECO mode,Press POWER while the unit is turned off (on standby),The display illumination(including the display demonstration) disappears.
•While ECO mode is activated, the display demonstration is canceled temporarily.
Note |
Don’t disconnected USB and AC Cord during
If you disconnected USB device when CD Ripping,the main unit will be power off and you may not delete the ripped file,In this case, please connect the USB on the PC and backup the USB data on the PC first and then formate the USB device .
On the CD playing ,connect the USB,the CD play will be paused and will resume playing till the USB initilization finished.
According the different USB the initilization time maybe different.
When the USB memory is not enough,it will be displayed “NOT ENOUGH MEMORY”
Starting CD ripping within 5 seconds can’t create the CD Ripping file.
Ripping file is only created when CD Ripping is stopped afters 5 seconds
(ex.
With external HDD,FAT format the USB can be CD Ripping,but not NTFS.The CD Ripping function of this product does not support all USB devices.
When you use CD high speed search function,the CD Ripping can’t work.
When CD Ripping, CD audio can’t be out.
During CD Ripping,do not deal impact.If is shocked while CD Ripping,CD Ripping maybe disengage.
Sometimes, some of USB devices, CD Ripping time is long.
If you use scratched disc for CD Ripping, or connect/disconnect HDMI cable during CD Ripping, there might be some noise and broken sound on ripped file.
When HDMI audio on, the CD RIPPING can’t work.
CD Ripping Feature Supported Player
Product | Company | Type |
Samsung | MP3 Player | |
Samsung | MP3 Player | |
Samsung | MP3 Player | |
Samsung | MP3 Player | |
Samsung | MP3 Player | |
Samsung | MP3 Player | |
Samsung | MP3 Player | |
Samsung | MP3 Player | |
Samsung | MP3 Player | |
Samsung | MP3 Player | |
|
|
|
MISCELLANEOUS
67 | 68 |