Samsung WA22M8700GV/YL manual Pump type Applicable models only

Installation

Installation

	Pump type (Applicable models only)
A	1. Open the hose cap (A), and insert the
	drain hose. Tighten the drain hose using
	the joint ring.

NOTE

• The position (side or rear) of the drain outlet depends on the model.

• Availability of the hose cap depends on the model.

2. Connect the other end of the drain hose to a standpipe or basin that is positioned 90-100 cm (*) from the floor.



WARNING

Make sure the end of the drain hose is not submerged by water. Otherwise, the washing machine may suffer serious damage.

18  English

WA8700K(HEATER)_03823B-00_EN.indd 18

2017-03-30 ￿￿ 11:42:22