Installation Instructions

DUCTING INSTALLATION INSTRUCTIONS

Installation and service must be performed by a qualified installer or service agency. IMPORTANT: Have your dryer installed properly.

NOTE: The WARNING and IMPORTANT instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution, and carefulness are factors that CAN- NOT be built into the dryer. These factors MUST BE supplied by the person(s) installing, maintaining, or operating the dryer.

Failure to install, maintain, and/or operate this machine according to the manufacturer’s instructions may result in conditions which can result in bodily injury and/or damage to property.

This dryer comes ready for rear venting.

WARNINGS

•Never use flexible duct inside the dryer.

•Do not terminate ducting in a chimney, range hood, gas vent, floor or attic space. The combination of lint and grease could create a fire hazard or cause damage.

•Provide an access for inspection and cleaning the exhaust system at least once a year.

EXHAUST LENGTH

The MAXIMUM ALLOWABLE length of the ducting depends upon the type

of duct, number of turns, the type of external venting point, and all conditions noted below. The maximum allowable length for both rigid and flexible metal ducting is shown in table 1 (next page). More than four 90°turns is not recommended.

VENTING CHECK LIST -

HOOD or WALL CAP

•Terminate ducting in a manner to prevent back drafts, entry of birds or other wildlife.

•Termination should present minimal resistance to the exhaust air flow and should require little or no maintenance to prevent clogging.

•Wall caps must be installed at least 300

mm(12”) above ground level or any other obstruction with the opening pointed down.

•If roof vents or louvered plenums are used, they must be equivalent to a 100

mm(4”) wall cap with damper, in regard to resistance to air flow, prevention of back drafts and maintenance required to prevent clogging.

SEPARATION OF TURNS Separate all turns by at least 1m(3ft.) of straight duct, including distance between last turn and dampered wall cap. If two turns must be closer than 1 m (3 ft.) deduct 3 m (10 ft.) from the maximum lengths shown in the table for each occur- rence.

TURNS OTHER THAN 90°

•One turn of 45° or less may be ignored.

•Two 45° turns should be treated as one 90°.

•Each turn over 45° should be treated as one 90°.

SEALING OF JOINTS

•All joints should be tight to avoid leaks. The male end of each section of duct must point away from the dryer.

•Do not assemble the duct work with fasteners that extend into the duct. They will serve as a collection point for lint.

•Duct joints can be made air and moisture-tight by wrapping the overlapped joints with duct tape.

INSULATION

•Duct work which runs through an unheated area or is near an air condi- tioning duct, should be insulated to reduce condensation and lint build up

and be sloped down toward outdoors.

NOTE: Never install screen inside exhaust duct.

WARNING: THE DRYER MUST VENT TO THE OUTDOORS.

TO PREVENT LARGE AMOUNTS OF LINT AND MOISTURE FROM ACCUMULATING AND TO MAINTAIN DRYING EFFICIENCY, THIS MACHINE MUST BE VENTED OUTDOORS.

SAMSUNG Clothes Dryers Owner’s Instructions 5

DV5008JFW-YL, DV5008JEW3/YFH, DV5008JEW3/XSG, DV5008JEW/XSG, DV5008JEW-XSG specifications

The Samsung DV5008JEW/XSG is a state-of-the-art tumble dryer designed to make laundry day more efficient and effective. This machine stands out due to its innovative technology, sleek design, and a variety of features that cater to different washing needs.

One of the most notable features of the DV5008JEW/XSG is its advanced heat pump technology. This energy-efficient system not only reduces electricity consumption but also maintains optimal drying temperatures without damaging the fabric. It ensures that clothes dry thoroughly while preserving their quality and extending their lifespan.

The appliance boasts a generous 8 kg capacity, making it ideal for families or those who frequently do large loads of laundry. With multiple drying programs to choose from, including delicate, mixed fabrics, and heavy-duty settings, users can select the perfect cycle for various types of garments. The precision drying technology automatically detects moisture levels in the laundry, adjusting the drying time accordingly to prevent over-drying.

Another prominent characteristic of the Samsung DV5008JEW/XSG is its Smart Control function. This feature allows users to monitor and control the dryer via a smartphone app, enabling them to start, stop, or schedule cycles remotely. Additionally, users can receive notifications when the drying cycle is complete, making it easier to integrate laundry into their busy lives.

Safety is also a priority with this model. The DV5008JEW/XSG includes multiple child safety features, such as a child lock to prevent accidental operation. Furthermore, the vent blockage detection system alerts users if there is a blockage in the vent, reducing the risk of potential accidents associated with hot air buildup.

The appliance is equipped with an easy-to-use control panel and a digital display that provides clear information on the selected settings and time remaining on the cycle. Moreover, its elegant white finish and compact design ensure that it can seamlessly fit into any modern laundry room.

Overall, the Samsung DV5008JEW/XSG is a pinnacle of modern laundry technology, offering energy efficiency, smart connectivity, and user-friendly features, making it a popular choice for households looking to enhance their laundry experience.