Samsung RS23NCSW1/ZAM, RS21FASW1/SAL manual Secure the water line, Install the water filter

Page 31

INSTALLING THE WATER DISPENSER LINE

Connect the water line to the refrigerator.

- Remove the compressor cover of the refrigerator.	WATER LINE
- Remove the compressor cover of the refrigerator.
- Connect the water line to the valve, as shown in the figure.
- When connected, check if there is any leakage.
If any, repeat the connection.
- Reattach the compressor cover of the refrigerator.

CONNECTION NUT

COMPRESSOR COVER OF REFRIGERATOR

Secure the water line.

- Using clip ”A”, fix the water line to the wall (the back of refrigerator).
- When the water line is secure, make sure whether the
water line is not excessively bent, pinched or squashed.	CLIP A
Complete the installation of the water supply line.


- Power on the refrigerator and press the lever on the right of the
dispenser until water runs out through the water line and all air has been empty.	WATER LINE
- At this time, check for any possible leakages at the join point in the water line.


After securing the water line, move the refrigerator to the required location.
Once the refrigerator is in position, do not move possibly.

Install the water filter.

-As shown, separate the sticker in the fefrigerator.

Remove the water filter from the box and put a month indicator sticker on the filter as shown.

-Write the month you installed the filter on the label. EX) If the water filter was installed in March, put “MAR”

-Remove the protective cap then position and insert the filter as shown,

-Slowly turn the water filter clockwise 90º to align the indication mark on the cover, locking the filter in postion. Do not overtighten.

SEPARATION

OF RED CAP

STICKER

(MONTH INDICATION)

COVER FILTER

ALIGN THE INDICATION MARK WITH LOCK POSITION.

INSTALLATION INSTRUCTIONS

CAUTION Please check if the indication line aligns with the lock position.

31

Image 31

Contents Side by Side Other Symbols Used Safety WarningsSafety Warning Major Features Setting UP the RefrigeratorBasic Model Dispenser Model Control PanelDispenser Model With CoolSelect Zone Basic Model With CoolSelect ZoneDigital Panel Power FreezeCold Water Temperature ControlIce Dispenser Water DispenserSet the locking device to the Lock Fix the water supply device tightly into the fixing holeWater Tank / Supply Device Installing a Regular BottleFreezer Shelves and BinsPlastics Drawer Food Storage GuideTempered Glass Shelf Door BinChilled Food Storage in Refrigerator Cool Select button OptionalSoft Freeze ChillThaw button Quick Cool buttonFront Leg cover Door binsDrawers Ice maker bucket optionalCleaning the Accessories Deodorizer optional Changing the Interior LightWater Filter Water Filter Indicator lightUsing the dispenser without the water filter Ordering replacement filtersChecking the Dimensions of your Entrance Door Installation of the RefrigeratorSelecting the Location for the Refrigerator Removing the Front Leg Cover Optional Removing the Front LEG CoverRemoving the Freezer Door Removing the Refrigerator DoorsRemoving the Refrigerator Door Reattaching the Freezer Door Reattaching the Refrigerator DoorsReattaching the Refrigerator Door Reattaching the Refrigerator DoorsReattaching the Front Leg Cover Optional Reattaching the Water Tube OptionalDoors will be uneven if the refrigerator is not level Please level the refrigerator firstAdjust the Clearance Between the Doors Checking the Parts Checking the Water Dispenser Line OptionalConnect the water line to the refrigerator Connecting to water supply lineCheck the water supply line Secure the water line Install the water filterConnect to the water supply line Warranty InformationInstalling the Water Dispenser Line Remove any residual matter inside the water supply line Check the amount of water supplied to the ice trayTroubleshooting Ambient Room Temperature Limits

Related manuals

Manual 36 pages 36.88 Kb

Manual 32 pages 13.54 Kb