E138A
Display Indicators
1
23
Front Panel Display
1.Disc type indicators
2.Play / Pause / Forward play
3.Displays various messages concerning operations such as PLAY, STOP, LOAD ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
10
Description-Rear Panel
| SETUP |
|
1 | 2 | 3 | 4 | 5 | 6 | 7 |
Rear Panel
1.DIGITAL AUDIO OUT JACKS
•Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
2.5.1CH ANALOG AUDIO OUT JACKS
•Connect to an amplifier with 5.1ch analog input jacks.
3.MIXED AUDIO OUT JACKS
•Connect to the Audio input jacks of your television, audio/video receiver.
4.VIDEO OUT JACK
•Use a video cable to connect to the Video input jack on your television.
•The VIDEO OUT SELECT switch must be set to the 525i(480i) or
5.
•Use the
•The VIDEO OUT SELECT switch must be set to the
6.COMPONENT VIDEO OUT JACKS
•Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video. Along with
•If 525P(480P) VIDEO is selected, progressive scan mode will work.
•If 525i(480i) VIDEO is selected, interlaced scan mode will work.
7.VIDEO OUT SELECT SWITCH
•Use this switch to set video out.
•If 525P(480P) VIDEO is selected, VIDEO and
Important Note
•Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan settings in the TV’s menu system.
•If 525P(480P) VIDEO OUT is selected, VIDEO and
• Select the VIDEO OUT SELECT switch in the Stop or Power Off mode. | 11 |
• Only NTSC discs can be played with Progressive scan. |
|