Reference, Setting Up the Parental Control

Setting Up the Parental Control

The Parental Control function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.

Setting Up the Rating Level / Changing the Password

1.With the unit in Stop mode, press the MENU button.

2.Press the √/® buttons to select Parental Page, then press the † or ENTER button.

3.Press the π/† buttons to select Parental/Password, then press the ® or ENTER button.

4.Press the π/† buttons to select Rating Level you want, then press the ENTER button. e.g) Setting up in KID SAFE.

5.Enter your password. If this is the first time, enter 0000. Then, enter a new password. The new password must be a number other than 0000 to activate the parental control function. Then, re- enter the new password.

Note

ŒKID SAFE.

´G (General Audiences) : All Ages Admited.

ˇPG (Parental Guidance suggested) : Some material may not be suitable for young children. ¨ PG 13 (PG-13 Parents strongly cautioned) : Some material may be in appropriate for children

under 13.

ˆ PGR (Parental Guide Recommended) : These are not necessarily unsuitable for children, but viewer discretion is advised, and parents and guardians are encouraged to supervise younger viewer.

Ø R (Restricted) : Under 17 requires accompanying adult.

∏ NC17 (NC-17) : No one 17 and under admitted. ” ADULT.

- If you have forgotten your password, see “Forgot Password” in the Troubleshooting Guide.

Setting Up the DivX

1.With the unit in Stop mode, press the MENU button.

2.Press the √/® buttons to select DivX Page, then press the † or ENTER button.

3.Press the π/† buttons to select the desired item, then press the ® or ENTER button.

Note :

•Press Ok will make the registration code window disappear.

•DivX can only be accessed at stop mode.

reference

Troubleshooting

Before requesting service (troubleshooting), please check the following.

Problem

Action

•5.1 channel sound is reproduced only when the following conditions are

5.1channel met :


sound is		1) The DVD player is connected with the proper Amplifier
not being		2) The disc is recorded with 5.1 channel sound.
reproduced	•	Check whether the disc being played has the “5.1 ch” mark on the outside.
(DVD-C370)	•	Check if your audio system is connected and working properly.

	•	In a SETUP Menu, is the Audio Output set to Bitstream?

The screen	• Press the ■ /			button (on front panel) for more than 5 seconds under no

is blocked	disc inside. All settings will revert to the factory settings.

Forgot pass-	• Press the ■ /		button (on the panel) for more than 5 seconds under no

		disc inside. All setings including the password will revert to the factory set-
word.
		tings. Don’t use this unless absolutely necessary.