Manual
Installation of the USB Driver
Go to “Downloading/Uploading files” on page 20 if the USB driver is in place. Follow these steps if the USB driver is not in place :
When an error occurs during installation of the USB driver
1 Check the device manager.
●Windows 98/ME:
Control Panel → System → Device Manager
●Windows 2000 (Professional):
Control Panel → System → Hardware →
Device Manager
●Windows XP (Professional):
Control Panel → System → Hardware →
Device Manager
2 Check if there is a device listed with an exclamation point or a question mark (displayed as unknown device or USB device).
3 Double click on the device listed with an exclamation point or a question mark.
English
Note
●If you are using Windows 2000 and your version of Windows does not recognize the USB driver please download and install the latest service pack from windowsupdate.microsoft.com
●The installation method may vary depending on the type of PC or operating system. Contact your PC dealer or service center for installation information.
●If errors occur continuously when you install the USB driver, reconnect the USB cable after rebooting your system.
After selecting the driver, | Select a compatible driver, |
4 click on [Update Driver]. | 5 click on [Next] to finish. |
16 | 17 |
|