M108(Asia) 4/17/01 1:15 PM Page 34
Setting Up the Display Options
Troubleshooting
1 With the unit in Stop mode, press the SETUP button.
| DISPLAY OPTIONS |
1 TV Aspect | 4:3 |
Before requesting service (troubleshooting), please check the following.
2 Use the UP/DOWN buttons to select DISPLAY OPTIONS. Then press the ENTER button.
3 Use the UP/DOWN buttons to select the desired item. Then press the LEFT/RIGHT buttons.
TV Aspect
Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
2. 4:3
Select this for conventional size TVs when you want to see the central portion of the 16:9 screen. (Extreme left and right side of movie picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
2 | Still Mode | Auto |
3 | Screen Massages | On |
4 | Front Display | Auto Dim |
5 | Black Level | Off |
6 | On | |
|
|
|
|
|
|
| RETURN | ENTER |
|
|
|
Problem
No operations can be performed with remote.
Disc does not play.
5.1channel sound is not being reproduced.
The | icon appears on |
screen. |
|
Action
• | Check the batteries in the remote. May need replacing. |
• | Operate the remote control at a distance of no more than 20 feet. |
• | Remove batteries and hold down one or more buttons for several min- |
| utes to drain the microprocessor inside the remote to reset it. Reinstall |
| batteries and try remote again. |
• | Ensure that the disc is installed with the label side facing up. |
• | Check the region number of the DVD. |
• | 5.1 channel sound is reproduced only when the following conditions |
| are met. : |
| 1) The DVD player is connected with the proper amplifier |
| 2) The disc is recorded with 5.1 channel sound. |
• | Check whether the disc being played has the “Dolby 5.1 ch” mark on |
| the outside. |
• | Check if your audio system is connected and working properly. |
• | In a SETUP Menu, is the Audio Output set to Bitstream? |
• | The features or action cannot be completed at this time because: |
| 1. The DVD’s software restricts it. |
| 2. The DVD’s software doesn’t support the feature (e.g., angles). |
Page
P4
P7
P12
P15
Still Mode
These options will help prevent picture shake in still mode and display small text clearer.
1. Field : Select this feature when the screen shakes in the Auto mode.
2. Frame : Select this feature when you want to see small letters more clearly in the Auto mode.
3. Auto : When selecting Auto, Field/Frame mode will be automatically converted.
Screen Messages
Use to turn
Front Display
Adjust the brightness of the unit’s front panel display.
1. Bright : Makes the Front Panel Display bright.
2. Dim : Makes the Front Panel Display dim.
3. Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.
Black Level
Adjusts the brightness of the screen.(On/Off)
Depending on a disc, you can play a NTSC DVD disc by
NOTE |
•How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button.
Disc Menu doesn’t appear.
Play mode differs from the Setup Menu selection.
The screen ratio cannot be changed.
No audio.
Forgot password
If you experience other problems.
| 3. The feature is not available at the moment. |
| 4. You’ve requested a title or chapter number or search time that is |
| out of range. |
• | Check if the disc has a Menu. |
• | Some of the functions selected in the Setup Menu may not work prop- |
| erly if the disc is not encoded with the corresponding function. |
• | The Screen Ratio is fixed on your DVDs. |
• | Make sure you have selected the correct Digital Output in the Audio |
| Options Menu. |
• Press power on from a cold start with no disc in the unit. Press the STOP | |
| and PLAY buttons simultaneously on the front panel for three seconds. The |
| Select Menu Language display will appear. Select the desired language |
| button. Press the SETUP button on the remote control to select the Parental |
| Mode. The Parental Mode is now unlocked as indicated on the display. |
| Press the DOWN button to select Parental. Press ENTER and the Create |
| Password display will appear. You can now set your rating level and |
| change your password to a new number. |
• | Go to the contents and find the section of the instruction book that |
| contains the explanations regarding the current problem, and follow |
| the procedure once again. |
• | If the problem still cannot be solved, please contact your nearest |
| authorized service center. |
P29~30
P32~33
P33
P33
P32
REFERENCE
34 | 35 |