USING THE NFC FUNCTION
Connect your NFC compatible device via Bluetooth to the Wireless Audio Portable using this simple
1.Turn on the NFC function on the smart phone and make sure the screen lock function on the smart phone is off. The smart phone's NFC function will not work if screen lock is on.
2.Gently touch the NFC logo [] on the left of the Wireless Audio Portable with the NFC supported device.
•If the Wireless Audio Portable is off, it will turn on automatically.
3.A
•When the connection is complete, the 'connected' message appears.
4.To disconnect the NFC device, touch the device to the Wireless Audio Portable's left panel again.
•To connect another NFC device while the first smart phone is still connected, touch that device to the Wireless Audio Portable's left panel. The Wireless Audio Portable will disconnect the first smart phone and connect to the second smart phone.
✎The NFC function is built into Android devices running Android OS 4.1 Jellybean or later.
-If your device is running an Android OS earlier than Android OS 4.1 Jellybean, you must download the 'Samsung NFC Connection' application from Android market to use the NFC function.
✎The position of the NFC antenna differs on smart phones. Check where the NFC antenna is located before connecting.
✎If your smart phone is covered with a thick case, the connection may not succeed.
✎The
✎NFC tagging for Bluetooth connection cannot be established while powering on and off.
✎NFC tagging for Bluetooth connection will not work while the battery indicator is blinking.
ENG
English 5