Rear Panel
1.Sustain jack: This jack allows you to connect an optional footswitch to the keyboard. When the footswitch is depressed, notes played on the keyboard will continuously sound as long as the footswitch is held, while MIDI controller information is sent from the Oxygen 8.
2.MIDI Out jack,“Keyboard”:This standard MIDI jack is a direct MIDI out from the keyboard in “standalone” mode, and is used to send MIDI messages to another MIDI instrument (such as sound module).
3.MIDI Out jack, USB”: This standard MIDI jack receives its source from the computer when software is set to Oxygen 8 MIDI Out, and is used to send MIDI messages to another MIDI instrument (such as sound module).
4.USB port:This USB connector jack is used to connect the Oxygen 8 to the computer’s USB port using a standard USB cable (included).
5.Power switch:The
6.Power jack:This jack is used to connect the keyboard to an optional 9vDC, 500mA
19